05 ridgeback 117ci s&s.. gaskets and seals ?

[Jerseykat1]

so i am putting the motor back together (traded for a basket case) and i need to order new gaskets and seals.. i want to nail it the first time. So would i be ordering seals and gaskets for a s&s super sidewinder + with a 4 1/8" and or 4.125" bore?

will be ordering from eBay, only because i could use the good feedback, and i have time to wait a few days.

need oil pump gaskets, crank seal, base gaskets, etc, etc. Also whats that spacer called that the crank seal rides on? i may need a new one since the previous owner gouged it pretty bad trying to remove the seal.

 

[Brew]

I'd suggest you contact (Mick) aka Mcgroom. He's gotten me gaskets for my scoots on many occasions... Just saying

 

[V]

Also if have the TP rocker boxes you will need a couple of diff. gasket than the S&S. But like mentioned contact McGroom and get it right the first time:2thumbs:

 

[Jerseykat1]

i would prefer to just know what gaskets i need to order based on bore size or engine type instead of being dependent on a specialist.. The rocker boxes Do look like i will need a custom gasket set for them. But the other gaskets and seals appear to be standard s&s stuff..

I will contact mcgroom about the rocker box gaskets.

 

[Dawgboy]

Bore is 4.125 " on the '07 117. I doubt the '05 is different

 

[woodbutcher]

i would prefer to just know what gaskets i need to order based on bore size or engine type instead of being dependent on a specialist.. The rocker boxes Do look like i will need a custom gasket set for them. But the other gaskets and seals appear to be standard s&s stuff..

I will contact mcgroom about the rocker box gaskets.

now, i wouldn't call Mick a specialist. he's more of a "run of the mill" :roll::roll:

luv ya, Mick. :2thumbs:

He's good people, and he'll help in any way he can. trust him.