Thanks, Yep I am back all good got in around 6PM. Hopefully Chong doesn't end up with another flat or two!Doing a check in.
So far we are home. Jonathan, todd&toni, Eric, Chong is about half way home. Haven't heard from Keith yet.
Let us know when yall arrive home safely!
Miss everyone already!
Chong had to get a u haul trailer, so he left today....his trailer is out of commission after 30 years of great serviceThanks, Yep I am back all good got in around 6PM. Hopefully Chong doesn't end up with another flat or two!
Took me an extra hour to get home I was fighting a 20mph headwind or crosswind the entire way, just depended on if I was going North or West and I needed to do both therefore no way outta of it. I just took a few extra gas stops to just get off the bike a few more times.
I did stay on 400 a little more than on my way down to try and make up a little time, I regretted that choice to save just 15 min. 400 is the worst if the wind is blowing.
I left with a sweatshirt and leather jacket in the AM I eventually was at least able to get some sun and take that off for a few hours in the afternoon, that did make it a little more enjoyable!
POTM!I forgot about this. Guess who created this work of art.
View attachment 105584
Bonfires and memories !!Where do you start ...
Thanks Dave and Buffy for the event !
Thanks Jersey Mike for the awesome coasters !
Thanks Keith for your friendship and non stop help .
Thanks Hman for the awesome endless food prep .
Thanks Knot and BakieBake for being you all and the answers to my endless questions .
Thanks to the Hoosier bootleggers
Thanks Johnathan for the fish fry and hooking me up with the LP.
Thanks Mr & Mrs Wright for always throwing down on what Evers need .
Thanks Big Dog Family !!
I think I can still use the center out of this wheel to weld in one that’s a little jimmied, NOT.. The under side of the trailer axle is what took all the damage and we all should send up a praise of thanks to the good lord for allowing our buddy Chong to make the gathering in one piece. There is no physical explanation available as to how that spindle and tire stayed attached to that trailer.. I’m so glad that you got home ok Chong and really proud of keith for all the additional help of escorting you home. .I forgot about this. Guess who created this work of art.
View attachment 105584
Gotta Love HDM Inc. God Bless Derek & Donna & Eric! Great vid Harry!I got in about 8:30 last nite. Like Eric I fought the wind heading home. Glad everyone is home safe....miss y'all. David, you and Buffy have flat out busted ass on the 2.0, making it just what you want. Thank you for the opportunity to spend time on the farm, and in the toyhauler! Ima do my best to get another trip in before it gets too chilly.
Here is another vid from the fun.
Thanks for all your help and wisdom !!!I think I can still use the center out of this wheel to weld in one that’s a little jimmied, NOT.. The under side of the trailer axle is what took all the damage and we all should send up a praise of thanks to the good lord for allowing our buddy Chong to make the gathering in one piece. There is no physical explanation available as to how that spindle and tire stayed attached to that trailer.. I’m so glad that you got home ok Chong and really proud of keith for all the additional help of escorting you home. .