I have a 2000 bigdog pitbull my front running lights/turn signals won’t come on, rears work fine headlight works fine horn works fine.

[Aragon406]

I’ve traced the wires all the way to ecm and it’s not getting any voltage out of it to the those two lights….. any suggestions?

 

[Mickmorris]

Thunderheart EHC?

 

[Mr. Wright]

How many wires at the plug for the lights? I don't believe any of the bikes had front running lights until 2004.

 

[Aragon406]

Thunderheart EHC?

Yes it’s the thunderheart

 

[Aragon406]

How many wires at the plug for the lights? I don't believe any of the bikes had front running lights until 2004.

There’s six it’s the middle two that go to each side 123
456
It’s 2&5 , 1 is the aux power and the 3&6 are high and low beams
4 is an empty terminal

 

[Aragon406]

There’s six it’s the middle two that go to each side 123
456
It’s 2&5 , 1 is the aux power and the 3&6 are high and low beams
4 is an empty terminal

At the bezel it’s self there’s 2 . One ground and one that should be hot.

 

[Mr. Wright]

At the front signal light, if there are only two wires, they are signal light only. No front marker lights. Is your tag light working?

 

[Chong]

How many wires at the plug for the lights? I don't believe any of the bikes had front running lights until 2004.

My 03 chopper only function as turn indicators . No running lite .

Don't know forsure if that's proper .. Haven't dug into it .

 

[Mr. Wright]

My 03 chopper only function as turn indicators . No running lite .

Don't know forsure if that's proper .. Haven't dug into it .

04 was the first year for front marker light. We've seen this before with the front signal lights. I've been digging for the thread that talked about it.

 

[Chong]

04 was the first year for front marker light. We've seen this before with the front signal lights. I've been digging for the thread that talked about it.

Thanks !