Floorboards for K9s

[roadie1389]

Did you all ever see this:

BIG DOG FLOOR BOARDS CHROME - Custom Harley Motorcycle Parts at Vicious Cycle Works

BIG DOG FLOOR BOARDS CHROME

viciouscycleworks.us

 

[41bigdawg]

Apparently they make a heel/toe shifter set up too

 

[Th3InfamousI]

Apparently they make a heel/toe shifter set up too

I was just on their website a few weeks back and couldn't find it? Did I miss it?

Sent from my 2PS64 using Tapatalk

 

[41bigdawg]

I didn't see it on the site either but someone posted that they will make you one if you call them....can't remember who that was, Ill see if I can find it.

 

[41bigdawg]

@Little-Boo said he had them make him one

 

[Th3InfamousI]

@Little-Boo said he had them make him one

For a while I swear I saw them on the website before, but maybe they will make them custom.

Sent from my 2PS64 using Tapatalk

 

[SKOGDOG]

Dlxprodx makes the heel/toe shifter. Pricey, but gorgeous.

Account Suspended

 

[SKOGDOG]

 

[Little-Boo]

Sorry for any confusion I may have caused, but I got mine from dlxproducts.com, and not from Vicious Cycles, I mentioned that they may have some according to their Ad. They are pricey but that are complete with pegs, and rear master cylinder. Just bolt on, bleed the rear and that was it. My reason going this route is because of my Neuropathy and foot drop. I have no strength on my ankles (both feet) and now that causes me to lose my balance unless I have my braces on. I walk like I just shit my pants stiff legged and it's not because anything else is stiff just my legs from the knee down. LOL. I still ride just to show off my bike but I don't go far. My wife sold my Tri-Glide to keep me from riding but the Dog isn't going anywhere for now. I may Trike it if I can find someone that converts BDM into Trikes.

Carlos

Big Dog 3” Extended Forward Controls Spike Flames Toe & Heel Shifter Side Chrome

BIG DOG 3 EXT FORWARD CONTROLS SPIKE CH FLAMES,BIG DOG CUSTOM ,BIG MDOG 3 EXT FORWARD CONTROLS SPIKE CHROME FLAMES TOE & HEEL SHIFTER SIDE

dlxprodox.com

 

[roadie1389]

Sorry for any confusion I may have caused, but I got mine from dlxproducts.com, and not from Vicious Cycles, I mentioned that they may have some according to their Ad. They are pricey but that are complete with pegs, and rear master cylinder. Just bolt on, bleed the rear and that was it. My reason going this route is because of my Neuropathy and foot drop. I have no strength on my ankles (both feet) and now that causes me to lose my balance unless I have my braces on. I walk like I just shit my pants stiff legged and it's not because anything else is stiff just my legs from the knee down. LOL. I still ride just to show off my bike but I don't go far. My wife sold my Tri-Glide to keep me from riding but the Dog isn't going anywhere for now. I may Trike it if I can find someone that converts BDM into Trikes.

Carlos

Big Dog 3” Extended Forward Controls Spike Flames Toe & Heel Shifter Side Chrome

BIG DOG 3 EXT FORWARD CONTROLS SPIKE CH FLAMES,BIG DOG CUSTOM ,BIG MDOG 3 EXT FORWARD CONTROLS SPIKE CHROME FLAMES TOE & HEEL SHIFTER SIDE

dlxprodox.com

Actually....... There is a guy on FB that converted a Wolf to a trike. It looks AWESOME and Matt and Team just finished a factory Trike. Got to see it at the Gathering. Looks really nice.

They basically used a Frankenstein kit. The biggest issue is getting the rake/trail right so it handles properly.

Frankenstein Trikes � Premium Trike Conversion Kits

Made in Pleasanton, KS. 20 Years of Engineering and Performance for Harley-Davidson Trike Kits.

www.frankensteintrikes.com

 

[Little-Boo]

I like that and certainly will be looking into it. This is like a second wind to me. I been there before. I converted a Sportster into a trike for the wife but she didn't want to hit the road by herself so we sold it. I think that will keep me busy for a while. Here is a pic of my wife's sporty trike, had a Big Dog Mastiff front end with a 14 degree chopper kit. I liked it but I had the dog, a 2013 Tri-Glide and her 2009 Sporty so my Chevy SSR was Cramped for space.


Carlos

 

[knothead]

Well i decided to put floor boards on my controls....i put these on the rear of both of my bikes for the wife like 2 months ago and she likes them.... it lets her move her feet around so i thought what tha hell i will try some on the front....well i couldnt get my toes under the shifter with my work boots but i could with regular shoes.... so i decided to modify them so here it is and it works now for my boots....so i drilled and tapped to move it 1 1/4" forward to move the floorboard back

So now i can move my feet around and the shifter and brake are away from my feet to give me alot of movement

 

[knothead]

I apologize idk why it loaded the same damn picture 5 times...sorry guys

 

[Th3InfamousI]

Well i decided to put floor boards on my controls....i put these on the rear of both of my bikes for the wife like 2 months ago and she likes them.... it lets her move her feet around so i thought what tha hell i will try some on the front....well i couldnt get my toes under the shifter with my work boots but i could with regular shoes.... so i decided to modify them so here it is and it works now for my boots....so i drilled and tapped to move it 1 1/4" forward to move the floorboard backView attachment 66091

So now i can move my feet around and the shifter and brake are away from my feet to give me alot of movement View attachment 66092View attachment 66093View attachment 66094View attachment 66094View attachment 66094
View attachment 66094View attachment 66094

I just wish those boards wernt almost all black. Otherwise seems like a great idea!

I sat on Rick's bike at the gathering and there was a whole new level of comfort with floorboards and that backrest he has. On long days 300+ miles especially on a rigid moving the feet would be nice. I can't do it yet, but maybe someday when I'm older! Haha. I gotta bust some folks chops every now and again!

Sent from my 2PS64 using Tapatalk

 

[knothead]

I just wish those boards wernt almost all black. Otherwise seems like a great idea!

I sat on Rick's bike at the gathering and there was a whole new level of comfort with floorboards and that backrest he has. On long days 300+ miles especially on a rigid moving the feet would be nice. I can't do it yet, but maybe someday when I'm older! Haha. I gotta bust some folks chops every now and again!

Sent from my 2PS64 using Tapatalk

Yeah i wished they werent all black either....im going try to remove the anodizing at some point....lol i still got my pegs and its only one bolt to swap back and forth for long trips...lol u will be older before u know it lmao...go ahead make some up and put on the shelf lol

 

[Little-Boo]

They look good and comfy too

Carlos

 

[knothead]

They look good and comfy too

Carlos

I will find out tomorrow if i totally like them or not ...will let u know the outcome

 

[Clay9]

Hey "letbigdogintocanada" I was thinking of installing those same floorboards on my K9. Any adapters needed or just a straight swap-out? Thx.

 

[Steven Proctor]

Hey "letbigdogintocanada" I was thinking of installing those same floorboards on my K9. Any adapters needed or just a straight swap-out? Thx.

This is what I put on my K9 from Kuryakyn. They are nice in the face that you can rotate the boards horizontally and front to back. It turned out pretty good. They are the kinetic boards. About $105.

 

[Mastiff Rider64]

Great look on the bikes, and great write up. Not sure if yall seen it or not but Mr. Wright did a post on relocating the pins. If the loctite and torque ever become an issue you might want to hit Shannon up or check out his post on this.