Ordered new tires yesterday afternoon, free shipping.

Energy One

Slick117

Active Member
What size did you get......I got a set of Avon cobras 300/35/18 from Rocky mtn ATV for $175 with free shipping.
 

bigkelk9

Well-Known Member
I thought I did good with 348 for both front and back avon cobras from jp cycles... won't do metzeler on the k9 again
 

badyellowvette

Active Member
I thought I did good with 348 for both front and back avon cobras from jp cycles... won't do metzeler on the k9 again
What was the problem with the Metzeler's? Bike had Avons when I bought it and were wore out in less than 3000 miles. Put on Metzelers and have 6400 on them and there done. Don't know what to buy next. Looks like Avons are less expensive. But what is the deal with the sidewall pattern, any pics of that?
 

bigkelk9

Well-Known Member
What was the problem with the Metzeler's? Bike had Avons when I bought it and were wore out in less than 3000 miles. Put on Metzelers and have 6400 on them and there done. Don't know what to buy next. Looks like Avons are less expensive. But what is the deal with the sidewall pattern, any pics of that?
On the k9 the Metzler is too wide and rubs belt, has to be cocked to the left a bit to clear belt causing premature bearing wear and more wear on the right.. I got great mileage and will always have Metzler on everything else but my k9.. I swear by them, just not for the k9.. don't know how it'll play out for u on ur bike, but I do hope u don't have the same problems I did
 

badyellowvette

Active Member
On the k9 the Metzler is too wide and rubs belt, has to be cocked to the left a bit to clear belt causing premature bearing wear and more wear on the right.. I got great mileage and will always have Metzler on everything else but my k9.. I swear by them, just not for the k9.. don't know how it'll play out for u on ur bike, but I do hope u don't have the same problems I did
The Metzler didn't rub my belt, I made the tool and lines it up perfectly. I was worried about that.
 

bigkelk9

Well-Known Member
The Metzler didn't rub my belt, I made the tool and lines it up perfectly. I was worried about that.
Thats good because on the k9 they do and I'm not gunna shave tires on a show quality bike ya know.. but glad to hear that.. wish they worked on mine because that is my tire of preference.. never had an avon.. will find out shortly..
 

BWG56

Guru
What size did you get......I got a set of Avon cobras 300/35/18 from Rocky mtn ATV for $175 with free shipping.
I just bought a Shinko from them also for $180 with free shipping
Here's was a surprise to me with my last Metzler, I replaced it because a stone cut the tire into the steel belt, so I changed it anyway. But this is what I found after I removed it, the side wall was cracked and it has a 2013 born date:oldrant:Ignore the 2nd pic other than the born date, I cut the tire off the wheel

IMG_0897.JPG IMG_0898.JPG
 

TapioK

Well-Known Member
I just bought a Shinko from them also for $180 with free shipping
Here's was a surprise to me with my last Metzler, I replaced it because a stone cut the tire into the steel belt, so I changed it anyway. But this is what I found after I removed it, the side wall was cracked and it has a 2013 born date:oldrant:Ignore the 2nd pic other than the born date, I cut the tire off the wheel

View attachment 35810 View attachment 35811
Both side on my Metz cracked too around 4000 miles. Yes I use 42 psi and those were not old dated.


Sent from my iPad using Tapatalk
 

Th3InfamousI

Administrator
Staff member
Both side on my Metz cracked too around 4000 miles. Yes I use 42 psi and those were not old dated.


Sent from my iPad using Tapatalk
After my last Avon I'm trying running with less PSI I'm at 38. My last tire wore down the middle like it was over inflated and only had about 4500 miles. I have 4K on this one and it looks almost new, for me the lower pressure seems to work better.

Sent from my 831C using Tapatalk
 

bdm7250

Guru
Supporting Member
After my last Avon I'm trying running with less PSI I'm at 38. My last tire wore down the middle like it was over inflated and only had about 4500 miles. I have 4K on this one and it looks almost new, for me the lower pressure seems to work better.

Sent from my 831C using Tapatalk
:agree: I run 36 psi on the mastiff, has over 5000 miles on rear and still looks great.
image.jpeg
 

TapioK

Well-Known Member
My metz was worn to a same shape as yours, except that burnout ark in the middle. New Avon seems like it's gonna last much longer.


Sent from my iPad using Tapatalk
 
Top