problem changing down

[Gaz]

Hi could someone give me some advice please, lm having difficultys with my 2006 K9 changing down, it will change from 6th to 5th gear no problem, and then but not all the time l cant find any gears, the only change l have made is having a baker 3 inch belt drive installed, could this some how have caused the problem?
Thank you in advance
Gaz

 

[pknowles]

Welcome aboard

 

[HMAN]

Welcome from Kansas. Sounds like you need to adjust your clutch....?

 

[Gaz]

Welcome from Kansas. Sounds like you need to adjust your clutch....?

thank you... would you know if theres some where on the forum which would tell me how to do it? Gaz

 

[titus722]

Search ,, adjust clutch ,, someone just posted a how to a few days ago

 

[titus722]

This might help

 

[Hirter6Pack]

Try this:
How to adjust your clutch (05 and newer)

 

[Gaz]

Try this:
How to adjust your clutch (05 and newer)

thank you all for your replies l will give it a go. Gaz

 

[Hirter6Pack]

thank you all for your replies l will give it a go. Gaz

Sorry I've never adjusted the clutch but I seen this on here awhile back and it sounds pretty straight forward.

 

[FrankBDPS]

Will that work with the open belt drive?

 

[pknowles]

Will that work with the open belt drive?

It worked for mine Frank. Just might need to play with the 1/4 turn on the pushrod after making contact.

 

[TapioK]

Yes it will.


Tapio

 

[Gaz]

Yes it will.


Tapio

yes it worked fine so again thank you for the advice can now get all gears !

 

[BadDawg Bill]

As I said in another thread, if you can put a nickle in between the lever and the stop it's adjusted right. Just back off the nut on the adjuster until it fits. Squeeze a few times to make sure it's adjusted...