francoblay1
The Spaniard
Oh man, what would I do without you, Thanks for your helpThe only thing that would cause something like that to happen is resistance."clean and tight" remember!
My turn I guess...... FUCK!!!!!!
- Thread starter francoblay1
- Start date
JimNubs
Member
As long as the loctite was only on the threads you would be alright. But with the loose connection from riding yesterday, the post might have overheated then. After the metal heated for the first time, the tinsel strength in the nut is gone. You will have continuous problems. Try and replace the nut inside the post and use a new screw.
toomanybikes
not enough time 4 riding
Maybe you should use the 9 MM on it now.
BWG56
Guru
Coolbreezin
Active Member
I too did the red Locktite. I also had lock washer on it. Still came loose. Thinking about doing a wire tie to it.Yiiii-Haaaaa!!!! I can´t stress it enough.... "All Connections Clean & Tight!"
Negative Battery Pole was loose........ AND I had RED Loctite in them..... Always remember that these vibrations can loosen up ANYTHING & EVERYTHING!!!!!!
You got an old Yuasa ? Just buy a new one and be done with it
Sent from my 831C using Tapatalk
Sent from my 831C using Tapatalk
francoblay1
The Spaniard
OK.... good morning..... I need coffee.... I thought it was a bad dream, shit.... going downstairs to work on it.....
francoblay1
The Spaniard
I´ve got the older Yuasa that I took off.... (then it was the VR) I will try that first.... Oh man, I am not looking forward to chase gremlins..... not today.....
chubs
Guru
Does it get hot under load, (cranking) or while it's running (charging)??
Cranking, probably crappy connection ,
Running, maybe overcharge? regulator? You know the drill, check the simple things first.
Good luck buddy!
francoblay1
The Spaniard
Cranking. As soon as I hit the start button it BURNS!!!
francoblay1
The Spaniard
Ok.... I´ve been two hours fucking around trying to get rid of the hungover, I am on my third Bloody Mary.... I think its time to go downstairs a have a serious chat with that Yellow-Bitch of mine.....
By the way... last night we went to a local "Bingo" and we won something!!! (its a first!!!)
By the way... last night we went to a local "Bingo" and we won something!!! (its a first!!!)
chubs
Guru
Quit hittin that button and clean up those connections before ya screw something else up!! Okay now, that bit of scientific advise will cost ya one bottle of that vino!
francoblay1
The Spaniard
Thats why I didn´t go downstairs yet..... and I just oiled the 9mm..... or was it the 10mm that I should use... damn...Quit hittin that button and clean up those connections before ya screw something else up!! Okay now, that bit of scientific advise will cost ya one bottle of that vino!
chubs
Guru
Something I forgot, If the terminal got hot enough to glow, it just might have Fubared the connection to the cable. possible ya need a new cable.Thats why I didn´t go downstairs yet..... and I just oiled the 9mm..... or was it the 10mm that I should use... damn...
francoblay1
The Spaniard
Yeah... I am working on all possible scenarios in my mind..... I just need to get my ass off the computer and go downstairs to get hands on with it.... pffffffffffffff
I might grab the little bike and go for ride instead.... I am not in a good mood this morning!
chubs
Guru
Remember Franco procrastination and masturbation are a lot alike, They're fun at the timeYeah... I am working on all possible scenarios in my mind..... I just need to get my ass off the computer and go downstairs to get hands on with it.... pffffffffffffff
I might grab the little bike and go for ride instead.... I am not in a good mood this morning!
, but in the end you've just screwed yourself 