DEAD COYOTE

Energy One
coyote 09

coyote 09

Member
The circuit breaker is good. The relay is for the horn. I have a +cable going to the circuit breaker. From the other end of the circuit breaker a cable comes out straight to the EHC to power it up . I know for a fact I have power going through it (EHC) because I have power at the ignition plus I physically tested the connection inside the plug. The last thing I'm going to check is if there is any power coming out from the ignition when I turn the key. Other than that, I think the EHC is bad. There are no other fuses or circuit breakers (visible). I really screwed the damn thing...
 
B

bigdogtech01

Well-Known Member
coyote 09 said:
The circuit breaker is good. The relay is for the horn. I have a +cable going to the circuit breaker. From the other end of the circuit breaker a cable comes out straight to the EHC to power it up . I know for a fact I have power going through it (EHC) because I have power at the ignition plus I physically tested the connection inside the plug. The last thing I'm going to check is if there is any power coming out from the ignition when I turn the key. Other than that, I think the EHC is bad. There are no other fuses or circuit breakers (visible). I really screwed the damn thing...
Click to expand...
Sounds like you have the wires mixed up on that circuit breaker. Like I have said numerous times, the circuit breaker or Maxi fuse are only used for the charging system. You should have one wire from Voltage regulator to Silver post and one wire from Gold post to positive side of battery. No other wires should be hooked into this breaker. All other wires go to battery.
 
coyote 09

coyote 09

Member
If you go into my gallery you'll see 2 pictures. One is the breaker and the other is the relay for the horn. If you take a look at the breaker picture you'll see the breaker with the red hot wire(left) coming from the battery and the other wire going to the ehc. I don't have to touch this wires for anything. That is how they are wired. The bike was running perfect.
 
B

bigdogtech01

Well-Known Member
Ok, well I can tell you with 100% certainty, that wire going to EHC should be on the positive side of the battery, not the breaker. But regardless, the EHC is most likely bad. I would at this point take it out and send to Curtis for further testing.
 
Diesel Dan

Diesel Dan

Well-Known Member
That would be really nice if somebody on here could get into Repairing these EHC's:)...........surprised no members on here have yet:confused:,we got some talented members on here:cheers:..........
 
BWG56

BWG56

Guru
Diesel Dan said:
That would be really nice if somebody on here could get into Repairing these EHC's:)...........surprised no members on here have yet:confused:,we got some talented members on here:cheers:..........
Click to expand...
I not to sure you can repair,either tests good or bad, all the circutry is podded over, if a component is fried, you would destroy the thing getting through the podding. And as sensitive as these are, like don't add lighting or anything else that requires 12v power to anything other than the battery itself, hooking up to the battery to the wrong sides is definitly an OH SHIT moment.:bang:
 
BigDogBro1

BigDogBro1

Made in the USA
BWG56 said:
I not to sure you can repair,either tests good or bad, all the circutry is podded over, if a component is fried, you would destroy the thing getting through the podding. And as sensitive as these are, like don't add lighting or anything else that requires 12v power to anything other than the battery itself, hooking up to the battery to the wrong sides is definitly an OH SHIT moment.:bang:
Click to expand...
Just to let you know the black epoxy material poured into the EHC is referred to as potting material, not podding.

And NO, the EHC's are not designed to be repairable.
 
BWG56

BWG56

Guru
BigDogBro1 said:
Just to let you know the black epoxy material poured into the EHC is referred to as potting material, not podding.

.
Click to expand...
:roll: notice I refered to it as a thing, cause I can't remember the letters either, I thought potting was something to do with flowers:lol:
 
Last edited:
francoblay1

francoblay1

The Spaniard
BWG56 said:
:roll: notice I refered to it as a thing, cause I can't remember the letters either, I thought potting was something to do with flowers:lol:
Click to expand...
Well what about a podded engine on your Dog?

A podded engine is a jet engine in a pod, typically attached below the wing or to the tail of the aircraft. The pod itself is called a nacelle.

Placing engines on the wing provides beneficial wing bending relief in flight. The further the engines are away from the fuselage the greater the wing bending relief so engines buried in the wing root provide little relief. Almost all modern large jet airplanes use engines in pods located a significant distance from the wing root for substantial wing bending relief. The pods are in front of the wing to help avoid flutter of the wing which, in turn, allows a much lighter wing structure. Locating the pod below the wing provides each engine with air undisturbed by the fuselage or wing. The wing also blocks some engine noise from reaching the aircraft cabin. :D
 
BWG56

BWG56

Guru
Send it to Curtis and he can verify/check, if its fried or not and possibly fix you up on another one. 2 maybe 3 days to ship it to him and 1 day back, however he does that, but he does.
 
You must log in or register to reply here.
Top