Fork seals leaking at 1300 miles :(

[KaptinAmerika]

Should have read your last post more closely.
Do you have a couple of curved or angled dental picks so you can get under the bottom edge and pull up on it.

 

[badyellowvette]

I will have to work on it, I do have dental picks but haven't tried them yet. It's a pretty tight fit. I have a bearing puller at work I might try if it will fit into the tube.
Do you sell just the upper bearings? Don't want to try to reuse it after I get it out.
If I have to the Harley shop is 60 miles away I will be within 30 miles of it tomorrow.

 

[KaptinAmerika]

As long as you don't trash it you can reuse it.
Put a little heat to the aluminum just before you pull on it with the picks and it will pop right out.
I haven't started stocking individual parts.

 

[badyellowvette]

As long as you don't trash it you can reuse it.
Put a little heat to the aluminum just before you pull on it with the picks and it will pop right out.
I haven't started stocking individual parts.

Thanks Curtis.

 

[badyellowvette]

Had to trash the bushing to get it out. Any one have a Harley part number?

 

[Softail Tracy]

How often is normal to replace seals?
I ordered a set from big dog.net. Is there a reason to not use them?


Sent from my iPhone using Tapatalk