No spark to plugs

[Dnyomo]

I have a 2004 Big Dog I put in a wire plus module now I have no spark to the plugs. It was running after I put the wire plus module but it would die can anyone help

 

[erldawg]

I have a 2004 Big Dog I put in a wire plus module now I have no spark to the plugs. It was running after I put the wire plus module but it would die can anyone help

OK I have to ask.. I have no experience with WP install. However did you re check all your wires?

 

[Dnyomo]

Yes It seems to be wired correctly, I have power going to the coil but no spark to the plugs. The coil is a new coil, is there a way to check if the coil is bad?

 

[DRBarnhart]

Yes It seems to be wired correctly...

I have to tell you it either IS or ISN'T wired correctly, there's no "seems to be" about it!

I have power going to the coil but no spark to the plugs.

Do you have power to the ignition module? And if there is, do the other lights on the ignition module blink while it's turning it over?

The coil is a new coil, is there a way to check if the coil is bad?

Check continuity of the primary and secondary of the coil. What values do you get?

If everything else checks OK I'd be checking the wiring and the cam sensor...

Dennis

 

[Dnyomo]

04 no spark to plugs

When I turn the bike over the green light on the ignition module comes on but then shuts off while the bike is turning over. I am looking at the directions that wire plus gave me and it does not look like the same module the one I have only has the one green light on it. Again I have power to the two leads on the coil but no spark to the plugs?