Nexus6
Member
OK... you guys ragged me enough about my right rear turn so time to do something a little more permanent and less wonkie. Got some cool ideas and a set of PERFECT little chrome clamps on the way from Phat Performance Parts. Searched like crazy to find something that will let me move 'em back and onto the sissy bar sides just past and out of the way of the pipes. These should do nicely. Made for 5/8" bar.
_
Anyway... I have some ideas based on other posts. Possibly adding an LED Tail/Stop floating in the Sissy Bar or a strip under the fender.
_
http://www.bigdogbiker.com/forums/customizing-add-ons/13161-big-dog-run-brake-turn-lights.html
_
But was wondering where the Signals get their flashyness from. Is it the LED board, the EHC or MAGIC ? Ooooooooo
I'm on an '03 Chopper with Factory wiring. Never had any electrical problems and as posted in my Intro the Factory, during recall, "upgraded" the electrical but don't know what that means. The EHC is the round plug not USB.
_
Anyway... I have some ideas based on other posts. Possibly adding an LED Tail/Stop floating in the Sissy Bar or a strip under the fender.
_
http://www.bigdogbiker.com/forums/customizing-add-ons/13161-big-dog-run-brake-turn-lights.html
_
But was wondering where the Signals get their flashyness from. Is it the LED board, the EHC or MAGIC ? Ooooooooo
I'm on an '03 Chopper with Factory wiring. Never had any electrical problems and as posted in my Intro the Factory, during recall, "upgraded" the electrical but don't know what that means. The EHC is the round plug not USB.

:2thumbs: