Spiked Inspection Cover Bolts

[BBChopper]

These are just license plate spikes (1/4 20 thread). They have to be spaced out the thinness on a nut. I turned down ¼ 20 stainless nuts on the lathe then polished them. This will work on the front sprocket cover too. The clutch cover is a different story; I am working on it now. The stud needs to be longer as well as the spacing. I will re post when I get it worked out.

 

[Gas Man]

Cool idea.. let me know how long till jab yourself in the leg with those!

 

[BBChopper]

Cool idea.. let me know how long till jab yourself in the leg with those!

These are dull but the other side has Jakes Death Spike!!! Already ripped my pants on it!! Had to rip the other leg so it would match!:2thumbs:

 

[bdmridgeback]

Just put an open primary on the laft side and it even out your pant legs, it did mine!

 

[BBChopper]

Just put an open primary on the laft side and it even out your pant legs, it did mine!

trust me I wish!!

 

[LamboV12]

Very cool. I have the exact same spikes on my plate. Never thought about the inspection cover.... Happen to have an extra 4 so will do same.

 

[slowrower]

Nice work Jake!

Great idea ... love them spikes!!

 

[BBChopper]

These are just license plate spikes (1/4 20 thread). They have to be spaced out the thinness on a nut. I turned down ¼ 20 stainless nuts on the lathe then polished them. This will work on the front sprocket cover too. The clutch cover is a different story; I am working on it now. The stud needs to be longer as well as the spacing. I will re post when I get it worked out.

I worked on the clutch cover today for a bit. Its gona be a pain in the ass. have to make longer spacers and cut longer all thread but it looks pretty cool. I'll post pictures later this week when al the covers are done. It should look sick!:2thumbs:

 

[Chopper Dave]

I would be interested in a set of spikes for the license plate..... 2 sets of 4
been trying to find somone who has some...

 

[Skulz]

Cool idea, where did you get the the spikes?

 

[Chopper Dave]

These are just license plate spikes (1/4 20 thread). They have to be spaced out the thinness on a nut. I turned down ¼ 20 stainless nuts on the lathe then polished them. This will work on the front sprocket cover too. The clutch cover is a different story; I am working on it now. The stud needs to be longer as well as the spacing. I will re post when I get it worked out.

BBChopper......did you get those from Jake? let me know....cause I would to get 2 sets of 4 for my license plate....

 

[KnotSo]

I forsee a market here, and yup, I need some too.

 

[LamboV12]

There's an older guy who sells them on ebay from time to time. He's really great and even made some custom lengths for me. I think he's in TX. Let me see if I can dig up his info...

 

[LamboV12]

I bought some from this guy - but this is not the guy I'm referring to
http://chopperindustry.com/index.cfm?fuseaction=product.display&Product_ID=2353

I'll look a little later on. My guy makes his own, then sends them out to chrome and can make just about any size or thread.

 

[Chopper Dave]

cool!:up:

 

[BBChopper]

Cool idea, where did you get the the spikes?

http://www.innovativemotorcycleacce...on=com_phpshop&page=shop.browse&category_id=2

 

[Chopper Dave]

http://www.innovativemotorcycleacce...on=com_phpshop&page=shop.browse&category_id=2

Hey BB...are these the ones you got.....the ones with the hex bottom...for $13.99?

 

[Gas Man]

Just get an open belt primary and don't worry about spikes to look cool! :lol:

 

[Chopper Dave]

Just get an open belt primary and don't worry about spikes to look cool! :lol:

I wanted those for the license plate Gas....then I think I am going to go vertical on the plate.....

 

[Gas Man]

bout time you go vertical.. man o man!!! :roll: