Need to go!!

[Steven Proctor]

Yes sir. I took a look at my set up and when I measured it is 12 3/8, 12 1/2. If your still interested

Yes sir it looks almost the exact same. Almost.. If you'd like it just let me know and we will get everything situated and worked out. Thank You sir.. ps, Nice Bike

Unfortunately, the only item I would really want is the belt, but since it is 4" wide, it won't fit my setup. I don't think it would be safe to cut it for a more narrow fit. LOL. I appriciate it though. Hopefully you can get it sold, even if you have to part it out.

 

[Rottweiler]

Yeah the belt is the only I might want just as a spare.

 

[Snuffy]

Mick wanted it for wall art. A couple hundred bucks is better than nothing

 

[Rottweiler]

I would give a hundred for the belt.

 

[Rottweiler]

Have to make sure it fits mine first. I know mine is 4 inch wide. Have to verify length though.

 

[KShep85]

Yes sir most defeniantly it's better than nothing. Just let me know whoever wants it or if yall wanna split it up. However yall decide to do we can do.. Thank Yall...

 

[KShep85]

Have to make sure it fits mine first. I know mine is 4 inch wide. Have to verify length though.

When I get ho.e ill measure the belt for you and send you pics of the measurement. That way you can see

 

[Mickmorris]

I would give a hundred for the belt.

I’m thinking tooth count? I know my BDL belt is way different from the karata belt. It’s the tooth count that matters though. Not so much length….

 

[KShep85]

I’m thinking tooth count? I know my BDL belt is way different from the karata belt. It’s the tooth count that matters though. Not so much length….

Yes i measured it twice by tooth count and got 138 both times. Here's a couple pics of the numbers off the belt if it will help..

 

[SKOGDOG]

I’m thinking tooth count? I know my BDL belt is way different from the karata belt. It’s the tooth count that matters though. Not so much length….

That! Length too—and even angle of the teeth. But it sure looked like the 4” Karata I had—o can look up the belt #’s from the photo I’d think.

 

[KShep85]

That! Length too—and even angle of the teeth. But it sure looked like the 4” Karata I had—o can look up the belt #’s from the photo I’d think.

How are you sir. So the full circumference is 46in. From center to center on pullys is 12 3/8. 138 tooth count and 45° angle on teeth

 

[Mickmorris]

How are you sir. So the full circumference is 46in. From center to center on pullys is 12 3/8. 138 tooth count and 45° angle on teeth

Now that’s some good information for someone needing one of these belts that will most likely never be available again….clutch basket as well…I’m sure someone is going to take this off your hands..

 

[Snuffy]

I am guessing its the wrong size for a bd

 

[KShep85]

Have to make sure it fits mine first. I know mine is 4 inch wide. Have to verify length though.

How are you sir. So the full circumference is 46in. From center to center on pullys is 12 3/8. 138 tooth count and 45° angle on teeth. If that helps at all with what you need to know