valve

[christer wernersson]

Hi have a quest
the valve needles where can it go

look on oilfiter and oilpump nothing
check all oil and filtred it checked crankcase too cant find any

 

[Mikeinjersey]

Hi have a quest
the valve needles where can it go

look on oilfiter and oilpump nothing
check all oil and filtred it checked crankcase too cant find any

Not sure what you are asking for. Check these out and you will see some needle valves.

Transfer - Dropbox

Dropbox is a free service that lets you bring your photos, docs, and videos anywhere and share them easily. Never email yourself a file again!

www.dropbox.com

 

[Clippe]

Not sure what you are asking for. Check these out and you will see some needle valves.

Transfer - Dropbox

Dropbox is a free service that lets you bring your photos, docs, and videos anywhere and share them easily. Never email yourself a file again!

www.dropbox.com

Thank you sir i wrote wrong i mean tappets needle

 

[Mickmorris]

Thank you sir i wrote wrong i mean tappets needle

Not super sure I understand the question either. Some performance lifters have needles at the roller. I would pull your pushrods. Remove the lifters and inspect them. If you didn’t find anything in your oil or filter what is causing you to question the lifters? Engine knocking?

 

[Clippe]

Not super sure I understand the question either. Some performance lifters have needles at the roller. I would pull your pushrods. Remove the lifters and inspect them. If you didn’t find anything in your oil or filter what is causing you to question the lifters? Engine knocking?

Hi sir all needles are gone have taken away CAM tappets and oilpump and filtered oil all rollerneedles 20 are gone any suggestions or i am take all engine appart

 

[Mickmorris]

Hi sir all needles are gone have taken away CAM tappets and oilpump and filtered oil all rollerneedles 20 are gone any suggestions or i am take all engine appart

Oh jeez. Yeah that sounds like a total rebuild. If your lifters are that damaged you most likely have a bad crank bearing internally. You will need to split the case to determine that though… sorry to hear this for sure

 

[Mikeinjersey]

Those needle bearings didn't disappear. They are waiting for you to be on the road with no cell service for your phone and then they will show up and wipe out your engine. Murphy's Law !! Page 5-29 shows a small filter on the high pressure side that you can check. I don't think 20 bearings will fit but it's something to look at before you tear the engine apart.

Dropbox

www.dropbox.com

 

[Clippe]

Those needle bearings didn't disappear. They are waiting for you to be on the road with no cell service for your phone and then they will show up and wipe out your engine. Murphy's Law !! Page 5-29 shows a small filter on the high pressure side that you can check. I don't think 20 bearings will fit but it's something to look at before you tear the engine apart.

Dropbox

www.dropbox.com

Hi sir already checked

 

[john sachs]

One lifter needle bearing, can take out the whole lower end.

 

[Mickmorris]

Are you sure you don’t have bushed lifters? They don’t have any needle bearings. So you wouldn’t find any. Obviously you have had a major problem or you wouldn’t be here looking for answers. What exactly happened?

 

[christer wernersson]

Are you sure you don’t have bushed lifters? They don’t have any needle bearings. So you wouldn’t find any. Obviously you have had a major problem or you wouldn’t be here looking for answers. What exactly happened?

Hi sir i take one apart and count to 20 needle S&S 107 with cam 600 and lift

 

[Mickmorris]

Hi sir i take one apart and count to 20 needle S&S 107 with cam 600 and lift

Well that answers that. Like John stated above just 1 of those needle bearings can take out the lower end.