Latest activity
-
Before you start messing with your key switch, disconnect your battery Neg - side first then the Pos + side. Regardless of any other... -
Mikeinjersey replied to the thread All lights come on, ignition off.Before you start messing with your key switch, disconnect your battery Neg - side first then the Pos + side. Regardless of any other... -
DanzDawg replied to the thread All lights come on, ignition off.Thank you for the reply, I plan on looking at everything behind the cover to start with. I wasn't sure if this was a typical Big Dog... -
Yeah take the cover off check wires for a cut or bad insulation somewhere. Remember that the key switch only grounds the input. So if...
-
Dont know if this will help but if you loosen the cable @ the starter and turn the cable towards the right side, you may gain a bit? I...
-
Could be , not sure but what I described is about all that's involved. I see by your pictures you've had the primary cover and pressure...
-
Thank you! I will definitely check the tightening torque of this nut in two days.
-
blackdogg6164 replied to the thread The question of oil filter.Dayum. Bikers paradise.......:p -
Hello friends. On a S&S Cycle I found a recommendation. Do you think the HF 170 (K&N 170 ) are suitable for these recommendations? A...
-
K&N 170 and 171 ARE the same exact length. Use the 170 for Evo style engines. We use K&N filters here. Never a problem. John
-
Have you checked the clutch basket nut .. Mine was loose .. you could actually grab the clutch and move it in and out . I was chasing...
-
Yeah take the cover off check wires for a cut or bad insulation somewhere. Remember that the key switch only grounds the input. So if...
-
Good job! If that doesn’t help him nothings gonna! :old2::cheers::chopper:
-
Stop riding. Time to open the primary and see what is going on. Clutch rod should only be 1/4 turn. Hard to say what happened until you...
-
Rottweiler replied to the thread All lights come on, ignition off.Yeah take the cover off check wires for a cut or bad insulation somewhere. Remember that the key switch only grounds the input. So if...
