Latest activity
-
Could be , not sure but what I described is about all that's involved. I see by your pictures you've had the primary cover and pressure... -
Thank you! I will definitely check the tightening torque of this nut in two days.
-
blackdogg6164 replied to the thread The question of oil filter.Dayum. Bikers paradise.......:p -
Hello friends. On a S&S Cycle I found a recommendation. Do you think the HF 170 (K&N 170 ) are suitable for these recommendations? A...
-
K&N 170 and 171 ARE the same exact length. Use the 170 for Evo style engines. We use K&N filters here. Never a problem. John
-
Have you checked the clutch basket nut .. Mine was loose .. you could actually grab the clutch and move it in and out . I was chasing...
-
Yeah take the cover off check wires for a cut or bad insulation somewhere. Remember that the key switch only grounds the input. So if... -
Good job! If that doesn’t help him nothings gonna! :old2::cheers::chopper:
-
Stop riding. Time to open the primary and see what is going on. Clutch rod should only be 1/4 turn. Hard to say what happened until you...
-
Rottweiler replied to the thread All lights come on, ignition off.Yeah take the cover off check wires for a cut or bad insulation somewhere. Remember that the key switch only grounds the input. So if...
-
Any. For evo style engine. 30 microns. Perhaps KN 170 С. NOT Twincаm.
-
Hello Big Dog people, This is a 2006 K9. I'm reaching out to see if any of you have had this issue. I will try to brief but...
-
Try 1/4 turn...or less. You'll find the sweet spot.
-
Rottweiler replied to the thread Ultima engine decode.https://www.scribd.com/doc/59579658/ultimaenginemanual
-
Rottweiler replied to the thread Ultima engine decode.Here is what I found. Not sure this helps? https://static.nhtsa.gov/nhtsa/downloads/MfrMail/01-022-N11B-10698.pdf
