Yellow Bitch Down, Need Bearings.

BWG56

BWG56

Guru
Th3InfamousI said:
Gotta talk to Ker about bed bath and beyond. He is our resident expert

Sent from my 831C using Tapatalk
Click to expand...
Th3InfamousI said:
Ker is always in the beyond section..you saw that birthday pic with the glasses. Guy is left field
Sent from my 831C using Tapatalk
Click to expand...
You guys are missing out, they had a really good special going on last weekend at Bath&Body, and with the coupons I had, I made a killin. It really feels good after a hard day of laundry and vacuuming to put some essential oils in the whirlpool tube and relax with all those tiny bubbles just getting, well you can imagine. Its good for ya to give in to your feminine side after a hard days work.:whoop::oldhardlaugh:
 
francoblay1

francoblay1

The Spaniard
Alright the saga continues... just got an email from the mechanic...... there is alot of damage.......


He needs measures of:

Fuck #1 Fuck #2 etc....:willynilly:

How those things (spacers?) are called....

everything is fucked up.... the manual is not clear enough...

I need measures of ALL SPACERS & BITS and Pieces that go in there, please! Thank you guys.

That is gona hurt..... :oldbang:
 
BWG56

BWG56

Guru
You need to go get some pics, did the spacers get ground up from the bearings going bad, they shouldn't have. And is the mechanic concerned because there is space on the swing arm and spacers before the axle is tightened, we need answers son, and pics. Now stop worrying about POTM and get us some pics.:smash::oldlaugh:
When the axle is tight, the inner race of the bearings and the spacers outside and inside the hubs become one, so they shouldn't be chewed up so to speak.
 
francoblay1

francoblay1

The Spaniard
BWG56 said:
You need to go get some pics, did the spacers get ground up from the bearings going bad, they shouldn't have. And is the mechanic concerned because there is space on the swing arm and spacers before the axle is tightened, we need answers son, and pics. Now stop worrying about POTM and get us some pics.:smash::oldlaugh:
When the axle is tight, the inner race of the bearings and the spacers outside and inside the hubs become one, so they shouldn't be chewed up so to speak.
Click to expand...
Spot on Ker... yes, exaclty what you said.... I will ask for pics. :oldthumbsup:
 
Marky-Marc

Marky-Marc

Well-Known Member
@francoblay1 here's some that I think will fit...if you get me mm measurements I can covert...they are made out of aluminum...you just need the LENGTH of the ones ON YOUR BIKE and I can order them for you....and then I'll fly them over in my PRIVATE CONCORD!!!!

We can also get a wheel spacer kit with many different sizes......

Love ya bro, keep your head up.....

http://www.ebay.com/itm/8-Big-Dog-2...able-to-Choppers-with-3-4-Axles-/391368797591

http://www.ebay.com/itm/IRONHORSE-H...XLE-SPACER-FOR-1-INCH-REAR-AXLE-/310842973365

http://www.ebay.com/itm/291113598745?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT


Not yours I don’t think…..
http://www.ebay.com/itm/3-Polished-...own-Wheel-Spacers-for-3-4-Axles-/371440287171
 
You must log in or register to reply here.
Top