WTB Primary Chain Inspection Cover 2006 Mastiff

[RABBID1]

I need the primary chain inspection cover , the one located in the center of the primary cover. Anyone have one or know where i can find one ?
Thanks
Joe

 

[BWG56]

Baker
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwibwPGY3fDVAhWGwiYKHQabB7EQFggmMAA&url=https://bakerdrivetrain.com/&usg=AFQjCNGFsXYfHV6rFD8Zs7A4YMW64ZjF4w

Under top tab labeled: Support, then Instructions, then down the left side: Big Dog service manual

 

[bdm7250]

#5

 

[Mr. Wright]

$89.00, holy crap. I think I'll be a little more careful with them in the future.
How bad is your broke? I've fixed a couple of them with JB Weld, that are still holding up.

 

[RABBID1]

$89.00, holy crap. I think I'll be a little more careful with them in the future.
How bad is your broke? I've fixed a couple of them with JB Weld, that are still holding up.

The upper right corner is broken off right where the mounting 1/4 " mounting bolt goes thru. Will try JB weld .

 

[RABBID1]

Baker
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwibwPGY3fDVAhWGwiYKHQabB7EQFggmMAA&url=https://bakerdrivetrain.com/&usg=AFQjCNGFsXYfHV6rFD8Zs7A4YMW64ZjF4w

Under top tab labeled: Support, then Instructions, then down the left side: Big Dog service manual

Thanks

 

[BWG56]

The upper right corner is broken off right where the mounting 1/4 " mounting bolt goes thru. Will try JB weld .

Good luck, inspection cover screws. 108in/lbs or 8ft/lbs, I personally go a little lighter so I don't end up doing what you did. But I would spend the money for a new one

 

[Th3InfamousI]

Good luck, inspection cover screws. 108in/lbs or 8ft/lbs, I personally go a little lighter so I don't end up doing what you did. But I would spend the money for a new one

Buy Derrick And Donna they have a Chrome billet one now for $99 I think. Won't break that one.

Look at this on eBay http://www.ebay.com/itm/372048363734

Sent from my 2PS64 using Tapatalk

 

[BWG56]

Buy Derrick And Donna they have a Chrome billet one now for $99 I think. Won't break that one.

Look at this on eBay http://www.ebay.com/itm/372048363734

Sent from my 2PS64 using Tapatalk

I got a heavier billet one from one of Eddie Trotta's boys a few years ago in Daytona for $50, I met him at Eddies trailer out at the Speedway and Eddie was there cleaning his bikes he had for sale.

 

[bdm7250]

Good luck, inspection cover screws. 108in/lbs or 8ft/lbs, I personally go a little lighter so I don't end up doing what you did. But I would spend the money for a new one

 

[JR03CHOPPER]

Wildsteedworx has them too. They are the updated ones as well.

 

[BWG56]

Wildsteedworx has them too. They are the updated ones as well.

Blah blah blah

 

[Mr. Wright]

The upper right corner is broken off right where the mounting 1/4 " mounting bolt goes thru. Will try JB weld .

The couple i fixed are still holding up. Clean the oil off the pieces with brame cleaner. Remember 99.7% of people will never notice it.

 

[KaptinAmerika]

Blah blah blah

Up yours jack ass....

 

[BWG56]

Luv ya to Dick