WTB - FSD exhaust or Eddie Trotta D2

[Th3InfamousI]

I know.. I Know crazy request but some people have sold them so figure maybe if I ask someone will part with them. Some people didn't like how loud they are or maybe sitting on their shelf for the last few years and now willing to part.

I have the FSD on my Ridgeback and love them.

Anyways if you happen to have one of these hanging around let me know...please.

Sent from my 2PS64 using Tapatalk

 

[bdm7250]

I know.. I Know crazy request but some people have sold them so figure maybe if I ask someone will part with them. Some people didn't like how loud they are or maybe sitting on their shelf for the last few years and now willing to part.

I have the FSD on my Ridgeback and love them.

Anyways if you happen to have one of these hanging around let me know...please.

Sent from my 2PS64 using Tapatalk

Never know, I figured I would never find a Karata op for sale..good luck..

 

[Nཛ͢ཀཇཧ༏ཧי]

If all else fails.


https://blowexhausts.com/pages/about

 

[Th3InfamousI]

If all else fails.


https://blowexhausts.com/pages/about

Has anyone ordered from them? Hell that is almost identical to FSD.

Never heard of them! Price is fair and the exhaust is stepped which is what I want. Not a super fan of the holes in the heat shield however.

My other concern is all the pics show LSD bikes. And their description says fits "some" RSD bikes depends on clearance.

Sent from my 2PS64 using Tapatalk

 

[Th3InfamousI]

A little digging and I found out BlowExhausts was formally known as FSD Australia. I'm guessing Frankie licensed them for his design. Cause they are the same pipe dimensions from what I can see.

I've got an inquiry out to this company my only concern is they are in Australia so I'm fucked for customer service.



Sent from my 2PS64 using Tapatalk

 

[Forsaken]

A little digging and I found out BlowExhausts was formally known as FSD Australia. I'm guessing Frankie licensed them for his design. Cause they are the same pipe dimensions from what I can see.

I've got an inquiry out to this company my only concern is they are in Australia so I'm fucked for customer service.



Sent from my 2PS64 using Tapatalk

Eric, let me know what you find. I need an exhaust on the chopper and a few other things after this "shakedown" ride. Thanks!

 

[JustFINE32]

Eric, let me know what you find. I need an exhaust on the chopper and a few other things after this "shakedown" ride. Thanks!

I bought a set for my 09 Coyote. They are to close to the drive and will require a fabrication of support that will keep them pushed out. I had the accident with the Coyote before I had the part fabricated so I didn't run the dog with them on. However, they were badass when I tested them and was trying to fit them. Even had a little bit of flame on decel.

Here is the fabrication they recommend:

I will forward anyone the emails they sent me. Contact me here or at justfine32@yahoo.com


Sent from my iPhone using Tapatalk

 

[Nཛ͢ཀཇཧ༏ཧי]

I think I actually like those better than my FSD. mine stick out so far that I've scraped them a couple times in corners.