WP374 Installation

[BillyD]

Hey gents,

Gotta do a WP374 install. In searching on the forum, I found a thread for "Jakes Instructions" however, I cannot access it...I got a message that I can't view it.

Here's the link:

http://www.bigdogbiker.com/forums/how/9727-how-wire-plus-2004-only-install-ehc-elimination.html

Can someone provide me these instructions?

Thanks!
BillyD

 

[BigDogBro1]

Try this link, it will help.

http://www.bigdogbiker.com/forums/introductions/25016-your-introduction.html

 

[BillyD]

Try this link, it will help.

http://www.bigdogbiker.com/forums/introductions/25016-your-introduction.html

Lol...you're right...I should of known better! Too much of a hurry these days.

Thanks!
BillyD

 

[2wheelmadman]

Heres a little tip I did when replacing my ECH to the wires plus.

Get a package of numbered cable flags. These are the sticky little number tags that most electrical supply places have. They usually come in a book like pad.

If you stick them on all the wires as per Jakes instructions, it makes it a lot easier when you can then cut the ECH off in one shot rather than trying to cut and connect each individual wire as you go.

I've done a few bikes this way, plus you to get to really make sure you put the right wire in the right plug the first time. Also, you can do the numbering one day, go drink beer and come back the next to finish the job.

 

[BillyD]

Heres a little tip I did when replacing my ECH to the wires plus.

Get a package of numbered cable flags. These are the sticky little number tags that most electrical supply places have. They usually come in a book like pad.

If you stick them on all the wires as per Jakes instructions, it makes it a lot easier when you can then cut the ECH off in one shot rather than trying to cut and connect each individual wire as you go.

I've done a few bikes this way, plus you to get to really make sure you put the right wire in the right plug the first time. Also, you can do the numbering one day, go drink beer and come back the next to finish the job.

Agree 1000%...especially the beer part! Only problem is...I can't get Jakes Instructions.

Thanks!
BillyD

 

[Slider]

Jake had the thread removed then disappeared and won't respond to pm. Tried to get help a few times with no response. I even bought the wp from him. Who knows.

Go to technical in wp website. They have some instructions but not as good as jakes. Good luck.

 

[BroadBand]

2004 WP 374 instructions (Jakes)

Try one of these links:

http://www.mediafire.com/?uje271aa62p2d3n

http://www.mediafire.com/download/uje271aa62p2d3n/

http://www.filefactory.com/file/4wq5tx8r0j1h/n/How_To_Wire_Plus_2004_ONLY_Install_EHC_Elimination_-_BIG_DOG_Motorcycle_Forums.mht

http://www.sendspace.com/file/zjgpls

 

[Slider]

Try one of these links:

http://www.mediafire.com/?uje271aa62p2d3n

http://www.mediafire.com/download/uje271aa62p2d3n/

http://www.filefactory.com/file/4wq5tx8r0j1h/n/How_To_Wire_Plus_2004_ONLY_Install_EHC_Elimination_-_BIG_DOG_Motorcycle_Forums.mht

http://www.sendspace.com/file/zjgpls

I've been looking for that! Thanks

 

[BillyD]

Thanks guys! That was a fun project! I would do it again at 1/2 the time anytime! Labeling everything first helped immensely.

BillyD
Ride Free