WP INSTALL FINISHED

[Chris04Masitff]

i just finished installing my Wire Plus . to say the least I am most pleased w my work and the ease of how things went. EVERYTHING worked correctly from first turn of the key. i just got back from my ride around the neighborhood ! I did it all myself except for the drill and tap of the coil cover. My bud Wayne from work did that for me and Robert, also my bud from work,made up my fuse harness.i did have to grind over the iginition switch on the coil cover for a flush mount. I have to say that this job requires PATIENCE. U cannot rush thru. but if you lock yourself in your garage or shop, and are careful it isnt bad at all. Ten hours from start to finsh from thurs nite after work, same on friday and good part of today.! im pattin myself on the back and quite proud! :2thumbs::2thumbs::2thumbs:

 

[mobsta]

good job chris,is there alot of wire pulling through the frame and such?

 

[Chris04Masitff]

:up:going riding w my lil brother tomorrow .He just picked up his first Vtwin today. (not first bike) its a pretty cool 94 Sportster with Fat Bob tank and bunch of other goodies. all in all a good day. Wanna also thank Jake for the help along the way....

 

[Chris04Masitff]

Mobsta , no, just 3 wires. i used a coat hanger w tight hook and some tape and pulled it thru slow and careful like.

 

[mobsta]

thanks,just curious.i want to do it but i just dont like fixn what aint broke just yet.:lol:

 

[Chris04Masitff]

i replaced the EHC once myself and bike was on its second when i got it. REFUSED to by one again... i would not have done it had it not gone out but.......it did, and now its GONE

 

[Old Hippy]

i replaced the EHC once myself and bike was on its second when i got it. REFUSED to by one again... i would not have done it had it not gone out but.......it did, and now its GONE

:2thumbs::2thumbs::2thumbs::2thumbs::2thumbs:

 

[Old Hippy]

i just finished installing my Wire Plus . to say the least I am most pleased w my work and the ease of how things went. EVERYTHING worked correctly from first turn of the key. i just got back from my ride around the neighborhood ! I did it all myself except for the drill and tap of the coil cover. My bud Wayne from work did that for me and Robert, also my bud from work,made up my fuse harness.i did have to grind over the iginition switch on the coil cover for a flush mount. I have to say that this job requires PATIENCE. U cannot rush thru. but if you lock yourself in your garage or shop, and are careful it isnt bad at all. Ten hours from start to finsh from thurs nite after work, same on friday and good part of today.! im pattin myself on the back and quite proud! :2thumbs::2thumbs::2thumbs:

Now, you go me wanting to jump on the Wire Plus bandwagon. I will wait till it pukes..or winter to do my Mastiff. I'm sure I'll be asking you some questions.!!!!

:2thumbs::2thumbs:

 

[Chris04Masitff]

any way i can help just ask.

 

[TheDeadOne]

deleted

Request For BDM/BDB Administrative Assistance!

 

[MisterMister]

Great job Chris!! Looks damn good!!

 

[Chris04Masitff]

Thanks Dead!

 

[Chris04Masitff]

u too Mister!

 

[SF180A]

Good job :2thumbs:
Will do this later this winter.

SF180A

 

[Little-Boo]

Looks clean nice job :2thumbs:

Carlos

 

[GKC]

Nice job, Chris

 

[Dozer1]

Nice job, Chris! :2thumbs: Guna do same thing if and when mine goes out again. Good to know it's easy enough to do on your own

 

[Mickeetwo]

great job....looks factory :2thumbs:

 

[armad]

WOW! Looks very clean and professional. My under seat bat box looks a mess, and it is factory original, almost.

 

[Chris04Masitff]

thanks everybody . if i can do it anyone can