Wiring questions

[MBOYTE]

I've searched the forum, but am still not sure. I'm having etc problems and am thinking about going the old school way using a 3 position ignition switch, feeding headlight and taillights off the accessory. Can I use the stock brake light switches? Will my compression reliefs work if I wire them to the starter solenoid? I'm not really worried about keeping the hand controls functional, but I have a wp kit ordered but am not sure how long it is going to take to receive it. I'm also replacing the ignition module with an Ultima kit.

 

[MBOYTE]

http://www.ultimaproducts.com/wiringsystemleds.html

Or would something like this work?

 

[TapioK]

I've searched the forum, but am still not sure. I'm having etc problems and am thinking about going the old school way using a 3 position ignition switch, feeding headlight and taillights off the accessory. Can I use the stock brake light switches? Will my compression reliefs work if I wire them to the starter solenoid? I'm not really worried about keeping the hand controls functional, but I have a wp kit ordered but am not sure how long it is going to take to receive it. I'm also replacing the ignition module with an Ultima kit.

You have a WP kit ordered! How did you manage to do that? No-one has been able to contact them for spares and I heard they are out of business! If possible do not go WP route. Or maybe it is an other wp than Wires Plus you are talking.

 

[MBOYTE]

http://wire-plus.com I ordered from tjis website. They took my money.

 

[MBOYTE]

Ok. I just sent a refund request. Gonna research these two, thanks!

 

[MBOYTE]

I sure wish I had asked before I ordered it. Sent doc an email about rip. But about wiring old school, can i use the stock brake light switches?

 

[cdogg556]

Go with Doc's ESC! You will "NOT" be dissapointed Michael!!!!!

 

[MBOYTE]

Yesir, going to try and get it ordered today. I just hope I can get a refund from wires plus! Thanks for all the replies!

 

[cdogg556]

Yesir, going to try and get it ordered today. I just hope I can get a refund from wires plus! Thanks for all the replies!

Michael, I have been through hell with my stock EHC, tried everything, even bypassed it for a while, finally got smart and listened to my buddy Ker and went for the ESC, by far the best mod I have done to my bike! I have "NEVER" used a batt tender since the install over 6,000 worry free miles ago! Changed my bike from a not too sure if I am gonna make it bike, to a reliable bike that I can count on every ride! Glad to see you are gonna go for it, like I said before, you will "NOT" be dissapointed!

 

[BWG56]

I sure wish I had asked before I ordered it. Sent doc an email about rip. But about wiring old school, can i use the stock brake light switches?

Doc sells the ESC with excellent support if you need it and instructions for the install. And yes with DOC's you will keep the OEM hand controls.

 

[cdogg556]

Doc sells the ESC with excellent support if you need it and instructions for the install. And yes with DOC's you will keep the OEM hand controls.

 

[MBOYTE]

I've reached out to DOC. Gonna get the ball rolling on the RIP.

 

[cdogg556]

I've reached out to DOC. Gonna get the ball rolling on the RIP.

Doc's unit is an "ESC" the "RIP" is different.

 

[MBOYTE]

Doc's unit is an "ESC" the "RIP" is different.

dead one customs for $675, Is this what I need?

 

[cdogg556]

dead one customs for $675, Is this what I need?

Yes, but for another $75.00 you should add the charging system warning light, it uses your oil warning light to tell you if your system has a fault in it, well worth the money.

 

[MBOYTE]

Yes, but for another $75.00 you should add the charging system warning light, it uses your oil warning light to tell you if your system has a fault in it, well worth the money.

OK. Is there anything else you think I should get? I just want to be sure I get exactly what I need so I can get her back going.

 

[MBOYTE]

There is a 3rd much better and easier solution and that is axels ehc that installs in minutes works flawlessly and has the longest best warrnty 2 years

Wild steed worxs??

 

[MBOYTE]

Yes he sells it

Is there anywhere else to get it cheaper?

 

[Mr. Wright]

WSW will give you a 10% discount if you tell him your a forum member. I'm going to vote for axels ehc also.

 

[cdogg556]

There is a 3rd much better and easier solution and that is axels ehc that installs in minutes works flawlessly and has the longest best warrnty 2 years

first of all, you don't even know how it will hold up over time, you don't barely put any miles on your bikes, on the other hand, me, Douggy and Ker have logged on some miles and can say trough experience that it is reliable.