Wires Plus or Doc's

Energy One
awg

awg

Guru
Well for those of you, (which includes myself) who did the wire plus, that was our only choice at the time. I don't think they offered any other alternative. So with that I think the wire plus was a decent replacement. Our only choice was to replace with another EHC. And since most people lost faith in the EHC wire plus was the way to go.
 
BroadBand

BroadBand

Since late 60's
awg said:
Well for those of you, (which includes myself) who did the wire plus, that was our only choice at the time. I don't think they offered any other alternative. So with that I think the wire plus was a decent replacement. Our only choice was to replace with another EHC. And since most people lost faith in the EHC wire plus was the way to go.
Click to expand...
Same here and zero problems in 8,000 miles.
 
Jwooky

Jwooky

Well-Known Member
No one is faulting anyone for going with WP previously, we are just cautioning people going forward based on many experiences.

My belief at this point is the WP failure rate is worse than the EHC ever was. There are much better options now.
 
roadie1389

roadie1389

Well-Known Member
awg said:
Well for those of you, (which includes myself) who did the wire plus, that was our only choice at the time. I don't think they offered any other alternative. So with that I think the wire plus was a decent replacement. Our only choice was to replace with another EHC. And since most people lost faith in the EHC wire plus was the way to go.
Click to expand...
I agree. This thing has had the WP, the PDM/HCI and now the RIP. I talked to the TH tech and we discussed the THMC and it really sounds like a solid unit. All solid state self reset micro relays and breakers inside. It's been said, a number of issues with WP was the install. Too many potential failures.
 
HMAN

HMAN

I just like my Freedom
Supporting Member
awg said:
Well for those of you, (which includes myself) who did the wire plus, that was our only choice at the time. I don't think they offered any other alternative. So with that I think the wire plus was a decent replacement. Our only choice was to replace with another EHC. And since most people lost faith in the EHC wire plus was the way to go.
Click to expand...

Yup. When I did the rebuild, it was the only option. I trust MY work, and WP is just down the road from me IF it craps out. So far so good, but we are talking serious vibration AND electronics together so fingers crossed.
 
garyb69

garyb69

Active Member
I got WP on mine and a total of well over 8000 miles now since it was fitted by the guy I bought the bike off and no problems so far. But I do agree options were probably limited at the time.
 
TapioK

TapioK

Well-Known Member
roadie1389 said:
I agree. This thing has had the WP, the PDM/HCI and now the RIP. I talked to the TH tech and we discussed the THMC and it really sounds like a solid unit. All solid state self reset micro relays and breakers inside. It's been said, a number of issues with WP was the install. Too many potential failures.
Click to expand...
Aint Rip, Doc and this THMC really the same unit?


Tapio
 
TapioK

TapioK

Well-Known Member
Jwooky said:
TH-MHC is the module used in both the RIP and ESC kit.

The kits are pre wired with matching connectors for your bike to be plug and play.
Click to expand...
Thats what I thought. So it is like arguing wether GMC is better than Chevy. It all comes to price and how much work you are willing to do yourself


Sent from my iPhone using Tapatalk
 
BWG56

BWG56

Guru
Not really, if the connectors weren't wired correctly, you have problems, the RIP had these problems but I think and I say I think they fixed them, the DOC unit has been plug n play and so were the other ones supposed to be. With that said, yes the controllers are the same, but are all the wires correct????
Doc's are, I just installed one within the last 2 weeks
 
MossBerg590

MossBerg590

Active Member
Another difference was that the Rip kit, the " run " switch acted as both the off and on switch and the " high beam" switch acted as both the high and low switch. Docs keeps all the functions the same. I think Curtis said that the rip kit is now updated so it uses all original functions. Doc has the added option of the fault light for the charging system. Same base but they are still a little different.
 
Th3InfamousI

Th3InfamousI

Administrator
Staff member
Common theme around the WP units is us guys who installed them 4+ years ago seem to be fine. They must have changed something since.

I got 10k on my WP and not a single issue. Don't get me wrong I wouldn't do WP again. It's a pretty painstaking install and to do it right is going to take 8-10 hrs minimum you gotta do one wire at a time pretty much so you font get confused. Unless you are doing them all the time. I probably took 14 hrs total in it. soldering, checking the connections 2-3x then heatwrapping everything.

Sent from my 831C using Tapatalk
 
You must log in or register to reply here.
Top