Wire Plus Installed

dingo

First 50
So two separate times, my bike died and had me stranded with no power to anything for about an hour before it decided to cooperate and restart. That was two times too many for me. My house is under construction due to Hurricane Sandy damage so I brought the dog in the heated house and installed the Wire Plus unit that has been on my shelf from Jake for the last two years.

Read the instructions many times - took my time - thought things through - and now I am EHC-less :whoop:.

Was able to get a 5 mile test ride in and all functions seem normal :2thumbs:.

Here are a couple of pics in case they might help anyone.

Dog is in the house




Deconstruction underway




Control module mounted inside battery box with single bolt through back of battery box (second pic below)






Power Module mounted underneath battery box




Deutsch plugs almost done - I was able to zip tie the completed plugs neatly into place where you see them (sorry forgot to get a pic before putting side cover back on)




Coil cover modified for new ignition switch with set screws installed (LEDs optional)






No more EHC (priceless !)

 

Brew

Troop Supporter
You must be one tall mo fo you got that dang bike way up in the air. Looks like ya did a great job...:2thumbs:
 

dingo

First 50
Note to self (and others similarly situated)....

To avoid being pulled over by the cops and semi-harrassed, make sure to turn on your lights before blasting down that well lit highway at night !
 

Evgeny

New Member
So two separate times, my bike died and had me stranded with no power to anything for about an hour before it decided to cooperate and restart. That was two times too many for me. My house is under construction due to Hurricane Sandy damage so I brought the dog in the heated house and installed the Wire Plus unit that has been on my shelf from Jake for the last two years.

Read the instructions many times - took my time - thought things through - and now I am EHC-less :whoop:.

Was able to get a 5 mile test ride in and all functions seem normal :2thumbs:.

Here are a couple of pics in case they might help anyone.

Dog is in the house




Deconstruction underway




Control module mounted inside battery box with single bolt through back of battery box (second pic below)






Power Module mounted underneath battery box




Deutsch plugs almost done - I was able to zip tie the completed plugs neatly into place where you see them (sorry forgot to get a pic before putting side cover back on)




Coil cover modified for new ignition switch with set screws installed (LEDs optional)






No more EHC (priceless !)

Hello. Please tell me where I can buy this part or her room?
 
Top