Winter check out and dreams

[Newcityboy22]

So I decided to attack all the known issues and boy am I in for a long winter. Here is my list so far

Front and rear wheel bearings $36
Kick stand $109
Head light$170
slam button for starter$70
Fuel line$30
Exhaust gaskets


Inner gas tank
Trans gaskets rebuild
Re paint
New speedo
Pcv reroute
Oil filter and pump
Cruise control
585 cam
Get Wizards

As of now I have her pretty much tore all the way down.
I would show you but I have no clue how to post pictures.
Also have some questions about the bike.
I want to do all of this myself. I am curious if it's easier to rebuild the trans on the bike or off. Second if I need to take off the sprocket what fuckin size is that nut. Third is there a how to some where on here on tear down of the transmission? if so I can not find it. They are in on one pic and out on the next. Can't blame YA its a dirty job. Also curious if any body has a .585 cam they would part with.

 

[BBChopper]

BB Gas Cap,

 

[Newcityboy22]

Gas cap?

 

[erldawg]

Consider sending tranny to Bigdogtech aka Andrew in Binghamton NY.
I believe BB is suggesting a new gas cap made by him.

 

[KnotSo]

Contact Curtis at http://wildsteedworx.com/ he can take care of most of your list in record time and save you considerable coin in the process :2thumbs:

So I decided to attack all the known issues and boy am I in for a long winter. Here is my list so far

Front and rear wheel bearings $36
Kick stand $109
Head light$170
slam button for starter$70
Fuel line$30
Exhaust gaskets


Inner gas tank
Trans gaskets rebuild
Re paint
New speedo
Pcv reroute
Oil filter and pump
Cruise control
585 cam
Get Wizards

As of now I have her pretty much tore all the way down.
I would show you but I have no clue how to post pictures.
Also have some questions about the bike.
I want to do all of this myself. I am curious if it's easier to rebuild the trans on the bike or off. Second if I need to take off the sprocket what fuckin size is that nut. Third is there a how to some where on here on tear down of the transmission? if so I can not find it. They are in on one pic and out on the next. Can't blame YA its a dirty job. Also curious if any body has a .585 cam they would part with.

 

[BadDawg Bill]

I bought the dog because that was the bike I wanted to build but building it would have cost me $23k and I bought it used for !2.5k.

After learning about it and fixing all the problems I have $23k into it. You have a long ways to go to make it into a perfect bike....

 

[Newcityboy22]

Well bb what's this gas cap you speak of

 

[Newcityboy22]

Oh also who has the oil pan covers, left and right

 

[Raywood]

Oh also who has the oil pan covers, left and right

Oil pan covers? Are you speaking about the battery side covers?

Also why do you want a new oil pump? I put 95,000 miles on my 05 Chopper and never touched the pump. If anything just clean out the check valve and install an oil pressure gauge and you should be done with it.

Just my 2 cents

 

[Newcityboy22]

Yea ray wood battery covers. Right side tab broke and got melted from exhaust and left side tab broke and has road rash from sliding down the highway a good 100 yards at 95 mph. As for "oil pump" I meant oil scavenger. I knew what I was talkin about lol. Does wild steed or anybody else ever do Christmas deals? That sure would be nice!

 

[kevinf]

good luck

 

[Guillaume]

You have the manuel book of your bike that helps a lot if you want do it your self and don,t verget the tools ,Well good luck with your winter project Bro.:2thumbs: