V&H PCX big radius on 04 chopper LSD??

[2005 Chopper]

Thinking about putting Vance and Hines PCX big radius two into two on my 04 Chopper left side Drive 117 inch. Anybody out there running them? Still running the stock Kerker exhaust. She needs something nice looking for ideas recommendations

 

[Mickmorris]

Thinking about putting Vance and Hines PCX big radius two into two on my 04 Chopper left side Drive 117 inch. Anybody out there running them? Still running the stock Kerker exhaust. She needs something nice looking for ideas recommendations

I had Santee .50 cal pipes on my ‘04 ridgeback. Looked & sounded nice. Have the Blow Exhaust on it now and like it much better. Both very nice and those V&H are really nice to. Just might need to do a little work to mount them at the rear. The Blow Exhaust just free hang.

 

[2005 Chopper]

Yeah I've been thinking about the blow pipes the Vance & Hines Big Radius about the only other ones I like. Been seeing a lot about having problems with the Vance & Hines heat shields.

 

[2005 Chopper]

The blows look like they stick out kind of far. Can't find any pictures looking down on them. Do they stick out further than this stock kerker??View attachment 127372

 

[mittens]

I Installed some Blows on a buddy's Breakout, and they mounted to the trans with a single bolt that caught both exhaust tips on the bottom. seemed secure not free hanging.

 

[HMAN]

I Installed some Blows on a buddy's Breakout, and they mounted to the trans with a single bolt that caught both exhaust tips on the bottom. seemed secure not free hanging.

Dont be surprised when they break. Shorty style pipes do way better free floating. I have a racing buddy that turned me on to that after the 3rd break. Hope they hold.

 

[Mickmorris]

I Installed some Blows on a buddy's Breakout, and they mounted to the trans with a single bolt that caught both exhaust tips on the bottom. seemed secure not free hanging.

They only mount to the transmission if you are mounting them on rubber mount engine/frame. Not sure what a breakout is but hopefully a rubber mount style engine setup. Otherwise they will break…

 

[2005 Chopper]

Blows are on the way. Both the pipes broke away from the manifold on the old kerker. So to hell with it I took it off took her out for my Sunday ride. Like how it cleaned up the back half of the bike with no big ass Muffler sticking out there. So blow it is. Thanks for your thoughts. I'll post a picture of her when I get them on

 

[Mickmorris]

Blows are on the way. Both the pipes broke away from the manifold on the old kerker. So to hell with it I took it off took her out for my Sunday ride. Like how it cleaned up the back half of the bike with no big ass Muffler sticking out there. So blow it is. Thanks for your thoughts. I'll post a picture of her when I get them on

You’re gonna love them. DO NOT put the baffles in or waste your money buying them….

 

[HMAN]

You’re gonna love them. DO NOT put the baffles in or waste your money buying them….

 

[mittens]

My chopper is soild mount and have LAF pipes and they are mounted to the trans too. never broken over 10 years of riding hard.

The breakout is a Harley, so I would assume rubber mounted