upgraded the 05 dog and need advice

[erldawg]

Ok.... got a toy run to do in Dec, then the heads come off and new rockers/springs/cam and boxes go on. Does anyone have the part #'s for these? Im running an 05 117 Ridgeback.
Thinking the s&s boxes (twin cam...right) roller rockers, and a 600 cam (any ideas on a 640-650?)......
The help is GREATLY appreciated.
Ps: carb is a xxx g with TJ and big radius pipes with baffels.
A few guys have suggested sending the heads into "Branch" to have them done there.... like i said ideas and thoughts are appreciated.

John Sachs for the headwork. He's a member here as well.

As far as a cam goes it would depend on what your looking for. Low end Torque or horsepower? There is quite a few threads on cam choices to consider just do a search and have fun reading.

 

[Tomtang aka Reptilejim]

Anyone tried a 626 redshift cam?

 

[spadesluck]

Let me know how if us know if you do change out your ignition becasue I am looking into that as well. I am pulling my heads when I get back from deployment sometime this month and sending those of to Sachs. I also have a 600 cam waiting to go in as well. The ignition is something that might need to be changed out but I am just not sure.

 

[prairiehorse]

i think i am ok on the lower end torque. like to up the hp..... I ride in MT so around 2500-8000 feet elevation, mostly around 3500. thanks for all the part #s old dog i appreciate it! I do a lot of around town but do weekend rides in the mountains around 300 miles. Its a lot of fun and would like a little more push to make some of the harley guys double take getting passed by a chopper! LOL