Ultima Street Style...

[Stone Cold]

I'm thinkin' about puttin' this on my '04 Ridgeback. Anybody done this? I need to find out where I can get a 1 7/16th pulley offset and a 1 7/16th backing plate spacer...I think.

 

[alhall88]

There's your problem right there. I went through all this with my belt drive. There is only one company that makes one for the 1-7/16 offset and thats primo and its the brute IV and its about $700 more than the ultima your looking at. Now here is what you can do I have been told. You can buy one for the more common 1-1/2 offset and machine down the front pulley spacer, and more than likely the starter jackshaft and the front spacer plate. I was also told after doing all that there would be no warranty on the belt drive. Personally I have no regrets with the AMERICAN made primo brute IV I have, as it has zero clutch chatter hooks up nice and gives you more options as far as belt covers.
By the way look at my "how to" installing a belt drive on a left side drive thats the primo unit I installed on my chopper with the 1-7/16 offset.

 

[Stone Cold]

Thanks Al.