Ultima 58mm Inverted

[chili08k9]

Hey guys I have started changing my front end out and having a few issues, 1st I hate the way the turn signals look and no ay to do the wires neatly, If I do not run them will ths be bad on the ehc only using the rears, or any ideas about the turn signals in the mirrors.. Second my brake line is about 4 in too short, with my new 6 piston calliper can someone tell me the lenth of the stock one (not around bike this week) and who should I use to make me a new one 4 in longer. Other than that I think its going to look killer Thank You all for any help Mike

 

[MARV]

Lose the blinkers and cap the ends. Been running that way for about 3 years.

Ill see if I can measure my brake line with string after dinner.

For the money its an excellent upgrade.

 

[mcgroom]

Once you get the length, I can help you out with a +4 brake like. If you really want front signals, I have an option you might be interested in.

Hit me up if I can help.

Mick

 

[chili08k9]

Thanks Marv, I may just end up doing that.

 

[MARV]

sorry, with all the drinking im doing this weekend i cant hold the string straight. ill try again tomorrow

 

[Oscar Maldonado]

sorry, with all the drinking im doing this weekend i cant hold the string straight. ill try again tomorrow

:lol::lol::lol::lol::lol:

 

[mcgroom]

:lol::lol::lol::lol::lol:

 

[pknowles]

Holding a string straight ought to be easy! pushing one might get alittle tricky wile indulging

 

[MARV]

Ok, measurements are ooo my 05 chop with K-9 bars and the 58mm inverted 5 degree trees and 12 over forks.

if your going the 5 and 12 its going to drop your front end down some. my bike was 3 and 10 stock and it raised it about 5/8". were as yours is 3 and 12 stock i do believe.

including the fittings i have 59" end to end.

a straight fitting up top and looks like a 60 degree down low.

without the fittings the line is 54'' female to female.

there is a little extra slack. if i did it again i'd go about 2" shorter

 

[chili08k9]

Thank you guys,