Turns but no spark on new (old) Ridgeback

[Mikeinjersey]

OK. Thank you for clarifying that for me! So, we're still on board with replacing the cam sensor and go from there?

Does anybody have a handy dandy party number or should I just remove it and go to my local HD shop?

If you decide to replace the cam sensor be certain you mark it's position before you remove it. IF damage is not visual when you remove it ask WSW or bigdogpartskingpin if they know a way to test your old sensor before you buy one.
Give either of these vendors your business not Harley.
These links will help.

CAM SENSOR [000-00175-22] - $59.99 : WSW, Rule Your Ride!

WSW CAM SENSOR [000-00175-22] - Cam Sensor for all 04 and older BDs with. JST connector installed for direct connection.

wildsteedworx.com

Cam Sensor Change: 2004 Bulldog

First off, this is not applicable to later models as they have a more traditional sensor. The 04's used the old cam sensor under the point cover approach. Why would you need to do this? Well, pretty much next to NEVER unless you're chasing a freak ignition problem like I was. I narrowed it...

www.bigdogbiker.com

 

[Mickmorris]

If you use the search engine & type in Cam Sensor as subject and Broadband as member you will open a old thread that broadband explains how to test your cam sensor.