TP 107'' pro series engine on Vintage Sport

[Emil Akhundov]

Hello everyone! Does enybody have experience with TP pro series engines? I also wondering is my engine original on my 1999 Vintage Sport or it was replaced? Will appreciate for any technical description of TP pro series like HP, Torque, Compression rate etc. If you compare TP 107 with S&S 107 what is better?

 

[Th3InfamousI]

Hello everyone! Does enybody have experience with TP pro series engines? I also wondering is my engine original on my 1999 Vintage Sport or it was replaced? Will appreciate for any technical description of TP pro series like HP, Torque, Compression rate etc. If you compare TP 107 with S&S 107 what is better?

2001 prosport had the TP stock.

Lots of people like them, some may prefer S&S. They work the same as S&S.

Some guys on here may hate them but that's because for a bit Big Dog ran TP heads on the S&S and it ended up creating some problems. However your TP is fully designed by TP and should be a great engine.



Sent from my 831C using Tapatalk

 

[FrankBDPS]

My 2000 has an s&s engine and a TP transmission case. Go figure. If it runs good just ride it.

 

[Th3InfamousI]

My 2000 has an s&s engine and a TP transmission case. Go figure. If it runs good just ride it.

Those vintage years I think it was more what they were able to get a good deal/what was at the shop! Haha

Sent from my 831C using Tapatalk

 

[PaulTP]

My 2000 Vintage Sport has a TP engine.

 

[89softail]

im looking for any info for a tp 107 has big dog stamped on the cases BM 01271 I.D. number im replacing top end gaskets need to know the thickness of base gasket the one that came off measures 0.018 im thinking a 0.020 to replace it but not sure

 

[Rod p.]

Hello everyone! Does enybody have experience with TP pro series engines? I also wondering is my engine original on my 1999 Vintage Sport or it was replaced? Will appreciate for any technical description of TP pro series like HP, Torque, Compression rate etc. If you compare TP 107 with S&S 107 what is better?

107 to 110 hp I have one on my 2001 bulldog yes it's original and it's a big dog tp 107 not ss motor with Edelbrock heads mine runs great 600 lift cams needs a good starter place in 3rd gear back up till pistons are down and hit starter starts every time has a good cam bump if y don't start it this way .

 

[Jersey Big Mike]

107 to 110 hp I have one on my 2001 bulldog yes it's original and it's a big dog tp 107 not ss motor with Edelbrock heads mine runs great 600 lift cams needs a good starter place in 3rd gear back up till pistons are down and hit starter starts every time has a good cam bump if y don't start it this way .

Why would you put it in 3rd rather than neutral when starting the bike?

 

[Mickmorris]

107 to 110 hp I have one on my 2001 bulldog yes it's original and it's a big dog tp 107 not ss motor with Edelbrock heads mine runs great 600 lift cams needs a good starter place in 3rd gear back up till pistons are down and hit starter starts every time has a good cam bump if y don't start it this way .

Does your TP 107 have external compression releases?

 

[Jersey Big Mike]

Does your TP 107 have external compression releases?

doesn't sound like it to me. even if I were to move the engine in 3rd to release compression, I'd likely go back to neutral before I hit start but that's just me.