Time running out

Energy One
Cruise-Mate

Cruise-Mate

Active Member
Hey all you forum members that have been thinking about putting Cruise-Mate on your Big dogs but waiting for whatever reason.

I'm very close to a deal with BDM at which time I will likely give them exclusive rights to sell the Big Dog Cruise-Mate.

As many of you know I give forum members a very good discount, however, once I make a deal with BDM I will honor that deal and not sell directly to Big Dog owners and the price will be substantially higher than it is now, so if you're interested you might wanna act fast.

Here's the pricing info; Present retail price is $84.95, anticipating a price cut to $69.95, however, that price cut may never happen. Right now I am selling to forum members for $57.71 delivered, unlikely you'll ever see this price again.

Only reason I'm posting this is because forum members have been very supportive of CM and I want all to have an opportunity to purchase prior to the upcoming changes.

If interested you can call me anytime at 877.642.3722. Cheers and happy and prosperous new year to all.
 
Raywood

Raywood

The Pirate
Staff member
Calendar Participant
Troop Supporter
Guess what all these bikes had in common at the Redwood Run June last year?


Yep, they all had a Cruise-Mate. Another popular successful item on here! :2thumbs:

 
stlmikie

stlmikie

I wish I had more money.
Im sorry. I still don't understand what is better about these than what came stock on mine? I want one but can't justify getting one if it isn't any different than what I have. Ya know what I mean. If one of you that have it could explain why it is so much better please do.
 
Raywood

Raywood

The Pirate
Staff member
Calendar Participant
Troop Supporter
stlmikie said:
Im sorry. I still don't understand what is better about these than what came stock on mine? I want one but can't justify getting one if it isn't any different than what I have. Ya know what I mean. If one of you that have it could explain why it is so much better please do.
Click to expand...
Your stock one requires you to use two hands. One holding the throttle and the other to screw that little thing in. Then you have the issue of "are you turning it the right direction"?

With the Cruise-Mate it's a thumb lever that you use your throttle hand to thumb it to lock it in position and you can thumb it or use your index finger to push it back to unlock.

Very simple creative design. Makes and excellent warm up device also.

:cheers:
 
Chopper Dave

Chopper Dave

SIICK!!!
Mikie....I also have the cruise-mate on my scoot....its alot better than the stockie.....set the throttle flip forward....flip back and it releases...instead of trying to screw in the spring thingy that the bike came with...look in the cruise-mate thread or Tom's site...shows how it works..:2thumbs: ..as Ray said...

 
stlmikie

stlmikie

I wish I had more money.
Am I going to have the open hole in the bottom where the old one was or is the old hole used?
 
Raywood

Raywood

The Pirate
Staff member
Calendar Participant
Troop Supporter
stlmikie said:
Am I going to have the open hole in the bottom where the old one was or is the old hole used?
Click to expand...
You use the existing hole but you will have to bore it out some and rethread it. Not to hard as many on here have done it already.
 
RRRUFF

RRRUFF

Well-Known Member
I put one on mine and a friends bike last week. It is far better than stock and I say a must have. Much more user friendly. Tom at Cruise-Mate is one of the best I have dealt with.
 
C

chaingunner

Guest
Got mine for X-mas,
great quality too. Well worth it. Plus it is greatly discounted now.
 
barhopper

barhopper

Another round please
I am not sure if the tap still comes with the kit, but I have my tap(I think) if anyone needs it.
 
RRRUFF

RRRUFF

Well-Known Member
No the tap and drill bit doesn't come with it. But they are cheap 21/64" drill bit and a 3/8X24 tap. I had to buy a tap and it was about $3 at NAPA.
 
Cruise-Mate

Cruise-Mate

Active Member
Drill and tap

For a while I gave the drill and tap with the kit, I bought a bunch on eBay cheap so was able to do that. Right now I do sell the drill and tap for $10 or if you want you can borrow them and ship them back.

Most I offer that to just say sell it to me, shipping back is too much a pain in the ass.
 
DeputyDog

DeputyDog

Active Member
I got mine from the wife for Christmas. Just got through putting it on. The directions included are pretty straight forward and was able to get it done...even for a non-wrench turn'r like myself. Haven't been out yet to try it, but got a feeling it is going to be sweet to use!
 
You must log in or register to reply here.
Top