Thunder heart

[V]

Okay so Dumbass of the day here. Installed my TH ignition. Bike fire right up. Looked at the tach to see if I would need to reset for the correct RPM. Which when I read the instructions it showed I would have to select a 1 or 2 in a certain section of the computer program. Well installed my disc uplaoded softwear in the laptop and dumbass has misplaced his instructions. :angry::bang:

Can any body tell me what section and where in the program this is. If ya don't I'll just keep bumpin it, taken up time and addin to my post count.

Thanks V

 

[V]

Bump, Well

 

[RubWhore]

Here ya go V

Plug in your laptop and go into the "Read Module Settings" and go to "Tachometer Cal" setting and change it to "1" if it is set at "0", or change it to "0" if set on "1". One setting cuts the pulses in half and the other setting doubles the pulses to correct the reading. Do a "Save settings" and that should do it.

 

[V]

Here ya go V

Plug in your laptop and go into the "Read Module Settings" and go to "Tachometer Cal" setting and change it to "1" if it is set at "0", or change it to "0" if set on "1". One setting cuts the pulses in half and the other setting doubles the pulses to correct the reading. Do a "Save settings" and that should do it.

You tha man! How can I be the man if you be tha man !:2thumbs:

Thanks V