NascarNutCase
Well-Known Member
Does anyone know what a 2004 Mastiff uses for replacement throttle and idle cable? And what clutch cable would it use?
Thanks in advance for any help.
Thanks in advance for any help.
Throttle and Idle Cable for 04 Mastiff
- Thread starter NascarNutCase
- Start date
NascarNutCase
Well-Known Member
So, I submitted a blog at V-Twin Connections to see if they might make any suggestions. I heard back pretty quickly too. However, the answer was informative but looks like we're still on our own to determine the exact replacements. I will share the response I got for the benefit of all.
"Yes, the cables for Big Dogs were made by Barnett. For a very short time, they were also produced by Motion Pro. If you haven't already tried, check Ebay for them. Specifically, look for shovelheadkicker. He bought the remaining parts from BDM and has been selling Big Dog parts for probably 10 years now almost exclusively on Ebay. Unfortunately, the cables used on 2004-up models are specific to Big Dog (due to the inner cable length). You may also try Barnett, directly, or through your dealer. They were becoming increasingly difficult to deal with before BDM was shut down. It's worth a shot, though. I feel for the owners of Big Dogs when it comes to stuff like this. In my opinion, they need to offer replacement parts for any OEs to which they committed."
Would still appreciate any first hand experience in replacement anyone has to offer.
Thanks to V-Twin Connections for offering their info on the subject. :up:
"Yes, the cables for Big Dogs were made by Barnett. For a very short time, they were also produced by Motion Pro. If you haven't already tried, check Ebay for them. Specifically, look for shovelheadkicker. He bought the remaining parts from BDM and has been selling Big Dog parts for probably 10 years now almost exclusively on Ebay. Unfortunately, the cables used on 2004-up models are specific to Big Dog (due to the inner cable length). You may also try Barnett, directly, or through your dealer. They were becoming increasingly difficult to deal with before BDM was shut down. It's worth a shot, though. I feel for the owners of Big Dogs when it comes to stuff like this. In my opinion, they need to offer replacement parts for any OEs to which they committed."
Would still appreciate any first hand experience in replacement anyone has to offer.
Thanks to V-Twin Connections for offering their info on the subject. :up:
