Suction cups for seat?

[Oldskuul]

Its not an emergency or anything, its just slowly driving me crazy. One broke at the tip.
Any ideas?

 

[woodbutcher]

walmart, michael's, almost any craft store. look at the suction cups for mounting crafts onto windows.

 

[mobsta]

:iagree:

 

[seatmaker]

Less than 2 bucks for a couple. I've been starting to replace them all in the seats I do now.

 

[mobsta]

OSH,ACE HARDWARE,LOWE'S and just about any store....

 

[Oldskuul]

Thanks for the suggestions!
If I go to a craft store do I have to give up my man card?

 

[linemup]

Thanks for the suggestions!
If I go to a craft store do I have to give up my man card?

you just did brotha man...........lol jk

 

[mobsta]

Damn I threw out hardware stores and you com up with craft stores?:lol::roll:

 

[linemup]

oldskull_ i just got back from walmart............had to buy some myself. you can use one as a frickin plunger for your toilet...................damnit man.

 

[dba777]

Suction cup size is 2.5".
No need to walk to the store. I bought these few month back. Holds just fine.
Suction Cup Hooks Large Hang on window Pack/2 NEW | eBay

 

[Nukeranger]

:2thumbs: ebay, nice info. Don't have to go anywhere and waste valuable time

 

[Doug760]

How exactly do these attach to the seat anyway? I am not at my house so no access to my manual...

Thanks,
Doug

 

[seatmaker]

Hit the nub / button with a heat gun to soften her up and push her through the hole with a straight short stubbed screwdriver.

 

[dba777]

Cut old one out with screw driver or knife. I used a thin nose serratd pliers to squize the base of the suction cup and stick it in the hole. Takes 5-10 minutes. May put some glue to keep it in place

How exactly do these attach to the seat anyway? I am not at my house so no access to my manual...

Thanks,
Doug

 

[Doug760]

I just thought it would be much more involved...Thanks for the info...

 

[Jonny Black]

In relevance to this thread... Does anyone know how to have a passenger pad or pillion pad on the rear fender that won't leave the foggy suction cups marks on your paint?