Stock handlebar ? Help

[GhostRider]

I have purchased harley controls and had to use a different type handle bar that I do not like.

I really do like the stock handle bars I had on my 04 chopper. I just did not like the controls.

I would like to find handle bars like the stock that will fit with my harley controls. Does anyone know the

Center width
Center spacing for risers
Pull back
Width
Rise

 

[Mr. Wright]

Cut the end of the bars off and weld in the right size, and have them rechromed.

 

[KaptinAmerika]

Cut the end of the bars off and weld in the right size, and have them rechromed.

X2:2thumbs:

 

[NZBigDog]

off the subject a little but....
My "drag bars" that came with the bike were actually too short. I was pushing my bike and ended up pushing on the end of the left grib, which moved and cracked, I had to take my controls off and found the bars were short by about 15mm which allowed the gribs to flex. I just welded some bar into the end and put gribs back on.
Has anyone else had this? or maybe my bars aren't original.....

 

[Mr. Wright]

I don't have the stock bars on mine, and ran into the same thing. I turned down a piece of aluminum, and hammered it in the end of the bar. Worked great.