Stinkin Stuck Gas Cap!!

[BWG56]

Gentlemen. I'm not trying to hi Jack the post, but. I also have very difficult to remove gas cap (left side) of the two on an 03 Pit Bull. When I replaced the tank savers, I JB Weld the crap out of it, it's not ever going to come off. So, where can I purchase two OEM gas caps? Thanks in advance. JJ

Donna and Derek 1-620-257-2009

 

[rickd62]

OMG, I'm prolly the last person to ask Some of these are epoxied in and some aren't, hopefully yours is not. They do make a tool with 2 pins in it to remove the paint savor but be careful it don't slip off and scratch the tank.
Mine had to be cut out, others didn't have a problem

Oh Boy! Hopefully mine isn't epoxied!!

 

[rickd62]

Ok now, so who has the experience with removing the paint saver from the tank and replacing with aftermarket saver and cap?

 

[Jersey James]

Donna and Derek 1-620-257-2009

Thank You.

 

[francoblay1]

Ok now, so who has the experience with removing the paint saver from the tank and replacing with aftermarket saver and cap?

Piece of cake with the right tool!

http://www.bigdogbiker.com/threads/removing-stock-gas-cap.42924/

(do not do what Ker did with a Hammer & Chisel!!!)

 

[francoblay1]

Made by @HMAN

 

[BWG56]

Piece of cake with the right tool!

http://www.bigdogbiker.com/threads/removing-stock-gas-cap.42924/

(do not do what Ker did with a Hammer & Chisel!!!)

If it isn't epoxied in

 

[francoblay1]

If it isn't epoxied in

Mine was epoxied... I had to be careful while applying force to the tool with a spanner... but it did came out

 

[rickd62]

Made by @HMAN

Wow Franco That's cool!! How do I get one?

 

[francoblay1]

Wow Franco That's cool!! How do I get one?

As I said, this one was made by @HMAN ,

Someone might chime in about where to buy something similar???