Steel braided fuel lines

[pauldeepsea]

Anyone know or recommend vendors for replacing the steel braided fuel lines for our bikes?

 

[StreetHog]

I've been wondering the same thing!! Mine is 5 years old so it's time to replace them...

 

[Oscar Maldonado]

Paul,
I ordered mine through Jegs. The pricing is fairly reasonable also.

JEGS Performance Auto Parts - Holley - Billet Specialties - Edelbrock - MSD - Moroso - Mr Gasket

Type Fuel lines in the search box and I think it's page 5.:2thumbs:

 

[francoblay1]

Hey guys, please let me know which one are you ordering... I need to order one too, but I am confused about which one should I get regarding specifications (temperature resistance, etc). Thanks.

Post the link

 

[Knuckles]

I bought a kit from j&p while in Sturgis. Came with 3 feet of braided line and 6 chrome ends. Was like $25 bucks. Make sure you get the correct size hose. Mine is 5/16ths

 

[Th3InfamousI]

Ordered 4 Feet and cut to length. You need 5/16" line

[ame=http://www.amazon.com/gp/product/B00062ZHR8/ref=oh_details_o06_s01_i00]Spectre Performance 29304 5/16" Stainless Steel Flex Fuel Line : Amazon.com : Automotive[/ame]

 

[francoblay1]

Thanks guys! :2thumbs:

 

[phatchopper300]

I bought a kit from j&p while in Sturgis. Came with 3 feet of braided line and 6 chrome ends. Was like $25 bucks. Make sure you get the correct size hose. Mine is 5/16ths

Thats where I go mine good deal

 

[moedog]

If you have a local hot rod or performance auto parts store you can buy it by the foot. I spent under $10 for mine. 1 foot and 2 chrome hose clamps 5/16ths fuel line.

 

[BBChopper]

Got mine at my local shop!:2thumbs:

 

[Mickeetwo]

If you have a local hot rod or performance auto parts store you can buy it by the foot. I spent under $10 for mine. 1 foot and 2 chrome hose clamps 5/16ths fuel line.

Same here :2thumbs:

 

[pauldeepsea]

Thanks all,

 

[francoblay1]

Thanks all,

X 2

 

[standuprick]

Summit racing because they were local. But you can buy them of ebay pretty cheap. Use some black electrical tape where your going to cut it and a hacksaw works great. I left the tape on after cutting and just put a hose clamp over it.

 

[francoblay1]

Use some black electrical tape where your going to cut it and a hacksaw works great. I left the tape on after cutting and just put a hose clamp over it.

Thanks for the tip, I like the idea :2thumbs:

 

[kickstart]

Try here, good stuff

Stainless Steel Braided PTFE Hose, SS Braided PTFE Hose, SS Tube Stub Assemblies, Heat Pump Hose, Fan Coil Hookup, Power Trim Hose, Biodiesel, Brake Lines, Fuel Lines, Silicone Hose, etc.

 

[Knuckles]

Summit racing because they were local. But you can buy them of ebay pretty cheap. Use some black electrical tape where your going to cut it and a hacksaw works great. I left the tape on after cutting and just put a hose clamp over it.

Yes do this for sure. Keeps it from fraying and no little pokey wires to stick you.

 

[BroadBand]

I used CLEAR shrink tubing instead of black tape, then made the cut.

Finish it off with either chrome or they come in colors too....

These are on eBay all of the time, search "chrome hose end."

:flag:

 

[Nukeranger]

I used CLEAR shrink tubing instead of black tape, then made the cut.

Finish it off with either chrome or they come in colors too....

These are on eBay all of the time, search "chrome hose end."

:flag:

Thanks for sharing this great idea. Why didn't I think of that!


Sent from my iPad using Tapatalk HD

 

[Knuckles]

Also remember to get 4 ends if you are running a pingel high flow fuel filter like I do.