Jones Member Oct 7, 2008 #1 08 ridgeback 300 miles. After deceleration from normal acceleration. the carb makes a sucky-washing- gurggling sound for 2-3 seconds, then pops once and bike stalls. Has done this 3 times. Any Ideas? Thanks Juice
08 ridgeback 300 miles. After deceleration from normal acceleration. the carb makes a sucky-washing- gurggling sound for 2-3 seconds, then pops once and bike stalls. Has done this 3 times. Any Ideas? Thanks Juice
barhopper Another round please Oct 7, 2008 #2 I would re-adjust carb from scratch. Go to the how to section, Gas has a great step by step process. Worked for me.
I would re-adjust carb from scratch. Go to the how to section, Gas has a great step by step process. Worked for me.
HOOLIGAN SICK BOY Oct 7, 2008 #3 I agree, use the how-to. Set the carb back to the factory settings then properly adjust it. This is the easiest way to start your trouble shooting.
I agree, use the how-to. Set the carb back to the factory settings then properly adjust it. This is the easiest way to start your trouble shooting.
Dakotabos Well-Known Member Calendar Participant Troop Supporter Oct 7, 2008 #4 Do you have stock intake and Exhaust?
lee Well-Known Member Oct 7, 2008 #6 have you looked at your spark plugs? they can tell you a lot if you know what you're looking at. Plenty of info on here for that.
have you looked at your spark plugs? they can tell you a lot if you know what you're looking at. Plenty of info on here for that.
G Gas Man Cool isn't cheap Calendar Participant Oct 8, 2008 #7 Be informed and check it yourself. The bike runs so just go thru the process and get it adjusted. Its easy. http://www.bigdogbiker.com/forums/how/4943-how-adjust-your-carb-check-jetting.html
Be informed and check it yourself. The bike runs so just go thru the process and get it adjusted. Its easy. http://www.bigdogbiker.com/forums/how/4943-how-adjust-your-carb-check-jetting.html
V Vegas Well-Known Member Oct 9, 2008 #8 That's not an adjustment. I bet you picked up some debris in the gas and your float is not seating. Pull the bowl plug and check for debris.
That's not an adjustment. I bet you picked up some debris in the gas and your float is not seating. Pull the bowl plug and check for debris.