speedometer codes

[beano]

my 02 p.b. speed o is flashing pulse,auto oec,and adjus.????? What does this mean?

 

[beano]

it also never does a test sweep

 

[narow37]

it may need to be calibrated. the service manual, at least my 07' manual has the instructions. basically you put the speedo in calibrate mode and ride the bike for a measured mile(I think) and then do something else. this sets the speedo for the correct speed.

 

[beano]

speed o sensor location

i have an 02 pitbull and no owners manual where is the speedo sensor located? mine isnt working

 

[kirk927]

Typically on the housing of the transmission. Not sure on the lsd though.

 

[alhall88]

on top the transmission just behind the trap door, oval shaped aluminum cover with a wire coming out of it.

 

[Gas Man]

Slightly different but you get the idea

 

[beano]

thanks ill look for that and clean it with something i guess

 

[beano]

by the way i cant do anything as far as calibrate goes the button on my speed o does nothing when i push it

 

[beano]

DO U THINK I NEED A NEW SPEED O SENSOR?

 

[beano]

HELLO!!!!!!!!

 

[Raywood]

HELLO!!!!!!!!

Easy beano, you last checked on at 5:45 yesterday so if someone doesn't answer your question within an hour just hang in there!!!

:flag:

 

[Raywood]

thanks ill look for that and clean it with something i guess

by the way i cant do anything as far as calibrate goes the button on my speed o does nothing when i push it

DO U THINK I NEED A NEW SPEED O SENSOR?

HELLO!!!!!!!!

Did you clean the sensor yet????

Have you ordered a Service Manual? It has the calibration sequence in it.

Can't tell you if you need a new speedo sensor if you haven't first cleaned it and tested it!

HELLO!!!!

:flag:

Not to dog you out but clean your sensor then tell us if it corrected your problem then we can go from there.

Good luck,
Ray

 

[beano]

CANT CALIBRATE BECAUSE CODES KEEP FLASHING

 

[beano]

SPEED O BUTTON STILL DOESNT WORK.SORRY RAY IM GOING TO MYRTLE THIS WEEKEND AND I GUESS IM A LITTLE IMPATIENT

 

[Gas Man]

Remember you don't need a speedo to ride....

 

[beano]

I FOLLOWED CALIBRATION INSTRUCTIONS BUT WHEN I PREES BUTTON AND SWITCH ON PULSE SHOWS UP THEN I RELEASE AND THEN THE TWO OTHER WORDS SHOW UP.NO NUMBERS AT ALL

 

[beano]

I KNOW BUT IT STILL BOTHERS ME

 

[beano]

I THINK MY ACTUAL BUTTON WASNT WORKING.I PUSHED SO HARD I THOUGHT I WAS GONNA BREAK GLASS AND I HEARD A CLICK.NOW EVERTHING IS WORKING CORRECTLY,FOR NOW AT LEAST.

 

[T.Byrd]

Will someone do a how to on cal. a speedo, I don't have a service manual
eather.Mine quiet working when you turn it on it cals. to 60m.ph. and reads out a #, then goes back to zero after that the tack works but the speedo does not.