Specifications sissybar

[Milco]

Can anybody help me to get the exact specs of the 18" sissybar and luggagerack for a 2007 K-9?:flag:
I want to let them make in Holland because of the costs of shipping.
Maybe somebody can get me a drawing?:2thumbs:

 

[Nukeranger]

I don't know if the drawings will help but maybe someone can take a close-up picture and write in the measurements for you!

 

[Milco]

Yeah Huw, that would be nice!

 

[Nukeranger]

I'd help you out right away but I have a Ridgeback with a 330mm back tire.

Sorry,

Huw

 

[Milco]

No problem man, I'll just wait for a K9 300 rider!:2thumbs:

 

[Milco]

Anybody has a picture or drawing with measurements for me?

 

[c.c.rider]

Milco I'll trace mind out on brown paper and PM it to you with a picture.

 

[Milco]

That would be great C.C.Rider! Thanks! :2thumbs:If I can do anything for you, just name it!

 

[c.c.rider]

I'll try to get done to day if not tomorrow got family in town.

 

[Milco]

No problem, don't hurry, enjoy your family, thats more important!!

 

[roughrider]

Hi Milco. I am in the UK, and i have a 22" sissy bar off a 2008 K9 for sale at £120 + shipping. Your rear fender rails need the pre-cut holes just forward of the rear indicators. The mounting points are precisely 360mm apart.. You can email me direct on paul16162@aol.com

Regards. Paul

 

[Milco]

Hi Paul, are you sure it's 22"? I thought the longest sissybar is 18"? It is for the 300 size tire?

 

[stlmikie]

It is 22" if you measure it from tip to tip. Is is 18" installed from top to fender.

 

[roughrider]

It is 22" if you measure it from tip to tip. Is is 18" installed from top to fender.

Yes, i agree, installed, it is probably 18" from the fender surface to tip of bar.... Yes, from a K9, 300 tyre

 

[BWG56]

Here's a copy of the tapered bushing (that I made) it goes in the strut to make up for tolerances in the hole.

 

[roughrider]

Here's a copy of the tapered bushing (that I made) it goes in the strut to make up for tolerances in the hole.

My 2009 K9 has a tapered fit sissy bar, but my earlier K9's had a straight/square fit into the rail/strut.

 

[Milco]

Thanks Ker!:2thumbs:

 

[Nukeranger]

Milo,

Did you get everything you needed? If not, I'll get with my local K-9 2007 riders. It might be after the new year!

Huw

 

[Milco]

Hi Huw, I am thinking about the offer of Paul, incl. shipping it will be 220 dollar. I doubt if I can let a sissybar make for that amount, including chroming.
C.C. rider will send me the details, if not I'll come back to you. Thanks mate!:2thumbs:

 

[Nukeranger]

OK