Spec for Compression reliefs

[Jones]

I cant find the spec for the compression relief valves. I know they are 14mm. My 2008 service manual does not show these specs. Searched here and I found "long reach" was the requirement, no specs. Anyone know the proper length and pitch of the threads?
https://secure.vulcanworks.net/store/Compression-Release-Set-14mm-Short-Reach.html



Thanks

 

[bdm7250]

I cant find the spec for the compression relief valves. I know they are 14mm. My 2008 service manual does not show these specs. Searched here and I found "long reach" was the requirement, no specs. Anyone know the proper length and pitch of the threads?
https://secure.vulcanworks.net/store/Compression-Release-Set-14mm-Short-Reach.html



Thanks

This is the kit I bought, you can also get them single.
https://www.ebay.com/itm/S-S-Cycle-...Release-Kit-/323218639970?hash=item4b41550c62

 

[Jones]

My mistake....I have looked at a dozen of the automatic variety seeing if I could get a spec...nada. I am going to put in manually operated releases.

 

[41bigdawg]

Why not just get the proper ones from Curtis? http://www.wildsteedworx.com/index....info&cPath=68_173_77_332_260&products_id=1159

 

[KaptinAmerika]

If you don't like the electric version there is a manual S&S version available also.
I had it on our site but took it down after 3 years because no one even inquired about it.

 

[Jones]

41bigdawg: personal preference, nothing more.

KaptinAmerika: I'll check S&S again, I must have missed them......oh shit...I did see the cable controlled "manual" set. I want the individual push button reset type.

Cheers

 

[KaptinAmerika]

41bigdawg: personal preference, nothing more.

KaptinAmerika: I'll check S&S again, I must have missed them......oh shit...I did see the cable controlled "manual" set. I want the individual push button reset type.

Cheers

I'm not sure if anyone makes them to fit the port on the S&S heads.
Jim's has a guide for drilling the head to put in the individual manual buttons.

Here is a search that has allot of info on it

 

[john sachs]

I'm not sure if anyone makes them to fit the port on the S&S heads.
Jim's has a guide for drilling the head to put in the individual manual buttons.

Here is a search that has allot of info on it

Trying to use a jig to install any compression reliefs other than the S&S reliefs, is a good way to ruin a set of S&S heads.
John

 

[BWG56]

Some things aren't worth the effort when a replacement still exists.

 

[bdm7250]

X2, stick with stock.

 

[KaptinAmerika]

Trying to use a jig to install any compression reliefs other than the S&S reliefs, is a good way to ruin a set of S&S heads.
John

Don't really need more than that input to tell you not do it...lol.