Roulette Peg and Grip set

Energy One

Raywood

The Pirate
Staff member
Calendar Participant
Troop Supporter
I ordered the new Big Dog Roulette peg and grip set from Vickie at KC Creations. Put a couple hundred miles on it and I'm not sure if I like them or not. I would say that they are great for around town but for long runs they don't provide the isolation from the vibration as the stockers do. They look nice though! :2thumbs: These type of grips and pegs are definitely for the RUBS and weekend warriors. :eek: I will have to swap them out for my next long trip (whenever that will be).

Later,
Ray
 

Raywood

The Pirate
Staff member
Calendar Participant
Troop Supporter
Okay, but let me wash it first. Got caught in a storm to and from the dealer so the bike is really trashed right now. But it was a nice ride which I got to some of it with P8RIOT. He took me on some nice back roads. :cheers:

Later,
Ray
 

P8RIOT

Well-Known Member
Calendar Participant
...they don't provide the isolation from the vibration as the stockers do.
Good point, Raywood - gotta agree with you there. My XOPRODOX grips look great, but the vibration is brutal. The fatter stock grips, with the embedded rubber strips, are certainly easier on the hands.
 

Gas Man

Cool isn't cheap
Calendar Participant
This is interesting considering I really want a set of those... I hope to hear that they turn out not so bad after a bit... cause my stock pegs are beat up... who knows... maybe I'll just swap them out for a new set of stockies...
 

zer0t

Active Member
I have the roulettes--from vickie as well--I didn't think the vibration was to bad, certainly a bit better than the all metal grips. What I do like is that the rubber strips on the pegs and grips provide some better gripping. However, like the xoprodox they are awfully sharp at the points. My big concern is at large runs that someone will wander near the bike and impale themselves.
 

Pops

Active Member
I have the roulettes--from vickie as well--I didn't think the vibration was to bad, certainly a bit better than the all metal grips. What I do like is that the rubber strips on the pegs and grips provide some better gripping. However, like the xoprodox they are awfully sharp at the points. My big concern is at large runs that someone will wander near the bike and impale themselves.
Like your avatar says "Life is Pain" :lol:
 
I have the roulette grips and pegs as well and I like them, and this is my 3rd set I've had the stock ones, a all billet set and now these. The only thing I don't like is I already have a gash on my head from standing up when I was checking something out on the bike and I guess its the way I set my foot when I ride but both my boots have slight cuts in them from the brake and shifter pegs. No big deal just a little more character to the boots.
 

P8RIOT

Well-Known Member
Calendar Participant
...I already have a gash on my head from standing up when I was checking something out on the bike.
Easy there, Alhall88, you're gonna start up a whole new HELMET controversy! :lol: You are right on, though - I've brushed past them too, and they are sharp!

The pegs are just fine, IMO, though I have drug the tips on a good lean. Maybe they'll serve as the warning noise to keep me from dragging my BR pipes, when I get them installed (next week, hopefully).

I do like the way these pegs bow in at the center. This eliminates any tendancy for my boots to slip off the ends, so they are very stable in that way.
 

zer0t

Active Member
I have the roulette grips and pegs as well and I like them, and this is my 3rd set I've had the stock ones, a all billet set and now these. The only thing I don't like is I already have a gash on my head from standing up when I was checking something out on the bike and I guess its the way I set my foot when I ride but both my boots have slight cuts in them from the brake and shifter pegs. No big deal just a little more character to the boots.
I have had the same problem working on my other bike on my stool, rolled past the BD and cut my leg really, really good.
 

Wildthing

Got Life?
I have the Roulette's and I've never noticed any discomfort.
Had the stockers on my other Mastiff but I hated them
because they were a pain to keep polished.:job:

Yeah my bike's spikes have drawn blood a few times.

BTW doesn't every American biker qualify as a RUB?
I've traveled outside the USA quite a bit and I've never seen
any riders on $15,000 to $30,000 motorcycles.....:rolleyes:
In fact most of them think all Americans are rich...............:rolleyes:
 

Raywood

The Pirate
Staff member
Calendar Participant
Troop Supporter
I figured my "rub and weekend warrior" comment would spark some interest! :D
I'll tell you though that when I did my cross-country trip I was doing about 750 miles a day for three days and on the third day I couldn't sign a CC receipt cause my hands were completely numb. But, like I said they (Roulette grips and pegs) are fine for general everyday riding. :flag:

Later,
Ray
 

Wildthing

Got Life?
I'll tell you though that when I did my cross-country trip I was doing about 750 miles a day for three days and on the third day I couldn't sign a CC receipt cause my hands were completely numb. But, like I said they (Roulette grips and pegs) are fine for general everyday riding. :flag:

Later,
Ray
750 miles a day?:eek: That's some crazy miles!:eek:
I put 200 miles on the Mastiff last Saturday & another
100 miles on it Sunday with no problems.
But riding 750 miles in a day is simply superhuman:eek:

You need a couch rocket for that kind of riding.:D

 

Fibersnake

Banjo Playing PsychoBilly
Wildthing wrote-

"I've traveled outside the USA quite a bit and I've never seen
any riders on $15,000 to $30,000 motorcycles"

I have also travled allot and worked outside the good ole U. S of A. Wildthing is right you do not see too many$30,000 bikes and especially Custom Cruiser and Choppers style.

One of the reasons is that in allot of countries such as EU, there is very heavy Taxes on some of the bikes, some are realted to cost alone, others are related to engines, size, etc. An example-if you were to by a typical HD in England, it will cost you nearly twice of what it would here. South Africa has close to a 100% tax on motorcyles also.

One thing I can say from working with quite a few foriegners over in the Sand Boxes, is that many of them would love to have a nice Chopper but due to cost, taxes and factors, the cost for them and registeration-inports, etc are out of reach for most or impratical.

There is also the factor of some pretty major emission regulations, safety issues, noise laws of so many other things. Modifying a V Twin like we tend to do, is pushing so many regs and require so major paperwork and cost in the EU, that it is just not norm. Even S & S has some of their specifically designed to meet the TuV requirements.

Love the U. S. A. so much more, even with all our crap after visiting other countries or talking to those from the other side of the Ocean.
 

Gas Man

Cool isn't cheap
Calendar Participant
Yeah I know a guy in Bereign... not sure of the spelling... anyway he owns a few sportbikes. And they have like a 100% tax as well. Rediculous if you ask me.

God bless the USA. We might have DOT and EPA but it sure beats the other way as Fiber laid out.
 

zer0t

Active Member
Sounds all these pointy pegs and grips are a garage hazard!!
I warned a guy at a bike night last Friday who was looking at my brother's bike but leaning back towards mine that he could get hurt if he should bump into the grip (basically my dog bites). He didn't listen, you should have seen him jump when it poked him between the shoulders. :eek:
 
Top