Roland sands venturi

[Yatyas314]

Got the air cleaner and the backing plate dosent have a place for the tube that vents crank case pressure , also the studs were too big for my jugs got proper studs but they dont have the vents for the crank case pressure relief like the ones that came in the Venturi Kit .....Gonna try and run that relief hose down and out to a mini filter .;..Anyone else have a better idea ?? Or ran into the same problem ...Bought the Venturi that is supposed to fit s&s E/G carb The bike is 08 mastiff SE
Your thoughts are appreciated

 

[1BADK9]

my unconnected vent tube just sits behind the air filter no minifilter, no problems.

 

[Yatyas314]

Thanks bro

 

[Iman]

i have the same bike and basically the same air cleaner. PM Heathen. You do not need to run a vent tube. You just need new bolts that do not need to breath. check out my garage. that engine does not breath thru those bolts

 

[Yatyas314]

Nice Bike ...........I will post pics of my setup I think i have it figured out she will be able to breath and I will be nasty as ever .....Looks like we have the same pipes V&H big radius ?? after the air cleaner did you re jet the bike ??

 

[Iman]

The engine breaths thru the rocker boxes so no need to run a tube. I am running the V&H 2-2, 585 Cam, 31 intermediate and 76 Main jet. Dyno - 98 Horsepower and 127 pounds of torque

 

[Yatyas314]

no cam work yet just the jets for the big radus ..Never had it dynoed just know it puts any other bike in the rear view mirror ....Except my boys witth the same engine ,mastiff,k-9,chopper

 

[Iman]

how about some pics of that bad boy

 

[Yatyas314]

only have time to update my avatar ......looking clean!