Replacing rear bearings

[moesterman]

I have my rear wheel removed (2006 K-9) for a tire. I did not like the feel of my bearings and removed the drive pulley, Before I continue is there a way to remove/replace the three bearings with out removing the hubs? .

 

[Th3InfamousI]

Yes and no. It's easier and safer to just unbolt the hubs, just 5 bolts! Easy Peezy.

Otherwise you have to have a bearing puller and you'll end up doing more damage and it will take longer with it all together than pressing them out from the inside.

Sent from my 2PS64 using Tapatalk

 

[41bigdawg]

Yes and no. It's easier and safer to just unbolt the hubs, just 5 bolts! Easy Peezy.

Otherwise you have to have a bearing puller and you'll end up doing more damage and it will take longer with it all together than pressing them out from the inside.

Sent from my 2PS64 using Tapatalk

Agreed, not much too it when you get it apart.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Mr. Wright]

When you get the hub off, look at it
There are line up marks on the hub and wheel. Make sure you get them lined up.