relocate brakelight after PDM install

[pauly]

Buy your led's from here.
http://www.customdynamics.com

 

[Fitzy]

Thanks Paul im still running the original ehc i have the aftermarket amber and brake led boards but i also have another brake light on the plate holder that flashes when i use the right turn signal maybe ill just blank the brake light on the plate holder unless you have any ideas how do you find the DOCs controller and was it expensive and what did they change for Aus standards
Cheers

 

[pauly]

It cost me around 700 US plus postage Jeff is the bloke's name and he should remember me and how he made mine.
Here is contact info.
http://www.deadonecustoms.com

 

[pauly]

When I bought my bike there was a little module spliced into the main harness that fixed
the problem you're having which would be a quick and cheap fix but if your EHC goes bad you,ll
have to replace it anyway.
I still have the little module somewhere if you want to go that way.

Paul.

 

[pauly]

Are you the bloke I bought mandrel bent handlebars on Ebay?
They are for Mutt.

Paul

 

[Fitzy]

Thanks Paul no wrong bloke but i would be interested in a look at that module you are talking about
Cheers

 

[pauly]

Here is a pic of that small module spliced into the harness.
Sorry about the big file!

 

[pauly]

Try again.
I had to make it smaller.

 

[pauly]

There are two green wires that I have cut you'll see them if you look closely, they go to your rear indicators if I remember correctly.

Paul.

 

[Fitzy]

Thanks Paul do you want to sell

 

[pauly]

I can send it to you for nuthin attached to the harness so you know how to connect it to yours but I'd like to get
the harness back. Would you be happy with that?

Paul.

 

[Fitzy]

Paul that would be great my email is fittzy@bigpond.com if you send me an email ill send you back my address or what ever is easiest
Cheers

 

[Coolbreezin]

Would this be of any help?
http://www.customdynamics.com/motorcycle_lights.htm

 

[Mr. Wright]

Here's another idea that might work for you

 

[Fitzy]

Would this be of any help?
http://www.customdynamics.com/motorcycle_lights.htm

Thanks pete i have checked them out
Cheers

 

[Fitzy]

Here's another idea that might work for you

Thanks Shannon the trouble i have is the bigdog wiring.There is only one wire that controls the turn and brake, it is a low and high intensity in one wire so when i switch the turn signal on the brake light flashes im not sure how to get around this
Cheers

 

[pauly]

I've sent you an email Fitzy.

Paul

 

[Fitzy]

Thanks Paul appreciate it

 

[pauly]

I have changed my mind-you can keep the harness as well and it's on it's way.
I have posted it this morning.


Paul.

 

[Svahna]

The way i did it i cut out rear light and brake light from the stock lighting.
Im runing them as a turnsignal only.
I put the rear light and brake on the side instead.