Rekluse clutch

Energy One
P

painter69

New Member
Which transmission do I have?
04 chopper.
I currently have a EFM auto clutch and can't get it adjusted. I want to switch to Rekluse. I have no idea which trans I have.
Tennis elbow and carpal tunnel are limiting the time I can ride.
I'm also going to switch my 13 CVO Road Glide
 
TapioK

TapioK

Well-Known Member
painter69 said:
Which transmission do I have?
04 chopper.
I currently have a EFM auto clutch and can't get it adjusted. I want to switch to Rekluse. I have no idea which trans I have.
Tennis elbow and carpal tunnel are limiting the time I can ride.
I'm also going to switch my 13 CVO Road Glide
Click to expand...
At least on newer Dogs your clutch basket is slightly modified to accept EFM, make sure it still works with Recluse. Can’t remember did I have to get a new basket when went back to original setup. I think not, but make sure. EFM is pretty demanding on plate pack thickness, I used different thickness of steels to get it spot on. EFM customer service was totally useless then. Try and test, tinker and test.... pain in the ass to get right.
I tend to remember Recluse didn’t fit on newer (-05 up) clutches.
 
P

painter69

New Member
My pic was too big, I'll try in the morning when I get home.
The EFM did work, then I broke a belt and I can't get the adjustment right
 
TapioK

TapioK

Well-Known Member
painter69 said:
My pic was too big, I'll try in the morning when I get home.
The EFM did work, then I broke a belt and I can't get the adjustment right
Click to expand...
Belt? You have an open primary? That makes tinkering with adjustment that much easier, but it also makes living with EFM so much more difficult. Dust in EFM bearings makes them stuck...
 
P

painter69

New Member
Here's a pic. I have a part number for my other bike. Need to find a Rekluse part # for the chopper


Sent from my SAMSUNG-SM-J727A using Tapatalk
 
TapioK

TapioK

Well-Known Member
painter69 said:
Here's a pic. I have a part number for my other bike. Need to find a Rekluse part # for the chopper


Sent from my SAMSUNG-SM-J727A using Tapatalk
Click to expand...
Well, Rekluse says on their site that they have a auto-clutch for 1998 Fatboy and it doesn’t need mods. I never have had my -03 clutch open, but I SUPPOSE it is a H-D clutch... So my QUESS would be it works OK. I would call Rekluse and just ask to make sure.
 
You must log in or register to reply here.
Top