Rear Teflon Pulley resolves Belt Chirp

[Fat_Bastard]

Belt Chirp with stock non-Teflon pulley was solved with Fuchs ProPrep Silkoline spray every few rides. However this was a nuisance...

My old buddy "Raywood" a few years back said I should get one of those stock newer Teflon coated pulleys and that would work too. Had occasion to get a stock Big Dog Mad Clown Pulley Teflon Coated. Yes, it is on and solved the Chirp problem with no belt dressing. As you can see in the photo after about 300 miles the beautiful Teflon coating seems to be quickly wearing off... This coating appears to be like that on a cheap frying pan! Will see how long it lasts...

Original stock pulley off the wheel; 2004 Big Dog Chopper

new Teflon pulley on the wheel

 

[HMAN]

You will not be sad. Put mine on about 9-10 yrs ago. Still quiet and solid. Teflon is some tough stuff.

 

[lentzii]

Hy, Riemenspannung? ? ? Faustregel! ! ! Bedenken oben in der Mitte mit 2 Finger (Daumen und Zeigefinger) um 90 Grad zum drehen möglichen Sein. Rad läuft gerade ? ? ? Gruß Lentzi.

 

[Fat_Bastard]

Hy, Riemenspannung? ? ? Faustregel! ! ! Bedenken oben in der Mitte mit 2 Finger (Daumen und Zeigefinger) um 90 Grad zum drehen möglichen Sein. Rad läuft gerade ? ? ? Gruß Lentzi.

Hallo deutscher Freund Lentzi, Die Gürtelspannung ist richtig. Die Riemenscheiben sind mit einem Laser... Nur zu sagen, die Teflon-Beschichtung ist von billiger Qualität. Aber kein Chirp!

 

[Fat_Bastard]

You will not be sad. Put mine on about 9-10 yrs ago. Still quiet and solid. Teflon is some tough stuff.

Thanks HMAN, That makes me feel better -- sincerely!

 

[lentzii]

Ök, sorry!