Rear Rotor Hub Bore

[xxcarpxx]

I have a cracked REAR brake rotor.. I have a few different rotors offered by friends, but it seems the hub bore is to small on those offered.. Can anyone offer and help coming up with rear rotor dimensions... If it matters, I have attached a pic of a front wheel like mine.. to show the style...
Thanks for any help offered..

 

[HMAN]

Check with Curtis at WildSteedWorx

 

[xxcarpxx]

Any machine shop can turn the I'd for you.just take the old one with you.it shouldn't take much. I have had a couple Harley softail rotors turned for bog dogs. Just make sure the thickness is the same.

Do you remember what ID you had the Carrier turn to?

 

[xxcarpxx]

No; but I can find out I think. We did them in our machine shop at work.

If you could let me know, I would greatly appreciate it...

 

[xxcarpxx]

@pknowles ..thank you for the info.. I am hoping to cut one down and have it ready to swap when I pull off my bad one... Or I may end up ordering one from Curtis... I've looked all over the Internet... he may be the only one with one..haha

 

[Little-Boo]

Curtis had them New for $119.00. You can't go wrong with one that fits like it should.

http://www.wildsteedworx.com/index....o&cPath=65_68_173_74_345_347&products_id=1373

Carlos

 

[xxcarpxx]

Boo.. I need the Carrier....to the price of $200.. Which is probably the route I'll have to go... I know that's not a lot of money, but with my work so unstable right now, I hate to spend more than I have to..

 

[Brew]

Bigdogpartsking sells the assembly, I bought mine from them. Might want to contact them to see if they have any...

 

[xxcarpxx]

Looks like I'm going to be reaching out to Curtis and/or Donna....