Primary Lisence Plate Holder

[Gas Man]

I am seriously considering cutting the tab off the swingarm for the plate.

Putting on the back side of the new open belt primary.

But what I need to find is a mount without a tail light. Just the mount with a tag light.

Anything boys?

 

[bdmridgeback]

I went through that when I was looking for my 2004 Ridge. Drag Specialities has a good selection, but I think I ran into the only ones that didn't have a brake light was for a stock HD closed Primary.

Here is a link:

http://www.accutronix.com/products/taillights/TL1.shtml

 

[Gas Man]

I was just going to link that one Jake.

The RMD open belt rear pulley has a 5 bolt pattern to the cover... I wonder if the Elite TC will fit...

 

[bdmridgeback]

If you want your license plate to spin with your primary, it looks like it will fit!! :roll:

No, does the outer plates stay fixed? bolted to a bearing support? If it is like the BDL, they spin with the pulleys. If they are fixed another problem looks like stands... If you look the rear cover has two holes on top and one on the bottom. The Accutronix Elite TC has one hole on top and two on bottom.

Doesn't look good for the home team, Gas! :bang:

 

[Oscar Maldonado]

Still looking.

 

[Gas Man]

Still looking.

Yeah no crap man... hopefully either I, somebody here, or Vickie will turn up somin.

 

[hoat]

http://www.wideopencycles.com/store_page_01.html

call these guys and tell them what you want or see what they got

 

[bdmridgeback]

http://www.wideopencycles.com/store_page_01.html

call these guys and tell them what you want or see what they got

These are sweet for you chain drive guys (custom starts at $98 per foot?) :

http://www.insanechains.com/chains.html

 

[hoat]

I have seen those chains and the pictures do not do them justice they are super sweeeeet and you can get them customized with engravings and the like

 

[Oscar Maldonado]

Gas I looked for about 2 hrs. Gave up. All I found were the ones you weren't wanting.

 

[Gas Man]

Thanks Oscar for the attempt. You're a good guy!

Hoat... that just might work.... the one they have on that page, is on a open belt.... so that might work. TNX! I'll call them Monday.

 

[cavracer21]

gas, why dont you just have a custom one made???

 

[Oscar Maldonado]

There you go Gas! Why didn't we think of that.

Draw something up and send it to Cav. Inc.:2thumbs:

 

[Gas Man]

gas, why dont you just have a custom one made???

Looking into that too. Problem... I don't have the RMD yet or a bike... plus I have to dis-essemble the bike in a timely manner too. Got a load of chrome, powder, ceramic coating to send out...

But we are checking with RMD to see if they have something or will make something...

 

[Gas Man]

Well the news isn't good.

Because RMD uses this nice cover all around the rear pulley. no outward bolts to hook anything too.

hook to the kickstand... probably going to get in my way.

On the axle... nope..sucks

Custom... could... but what will I gain? Not sure... will probably just get the stock one chromed... at least i won't have to polish it!!